Husqvarna 327HE3, 327HDA65, 327HE4 manual Blades, Blade guard

Page 9

GENERAL SAFETY PRECAUTIONS

In countries that have a warm and dry climate there is a significant risk of fire. We therefore fit certain mufflers with a spark arrestor screen. Check whether the muffler on your machine is fitted with this kind of screen.

!

WARNING! Bear in mind that:

The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

If the muffler on your machine is fitted with a spark arrestor screen this must be cleaned regularly. A blocked screen will cause the engine to overheat and may lead to serious damage.

!

WARNING! Mufflers fitted with catalytic

converters get very hot during use and

 

remain so for some time after stopping.

 

This also applies at idle speed. Contact

 

can result in burns to the skin.

 

Remember the risk of fire!

!

WARNING! The inside of the muffler

contain chemicals that may be

 

carcinogenic. Avoid contact with these

 

elements in the event of a damaged

 

muffler.

Blades

To ensure good cutting results it is important that the contact pressure between the blades is correct. The contact pressure is adjusted by turning the screws on the underside of the bar clockwise as far as they will go. Then turn the screws anticlockwise a 1/4 turn. Lock the screws using the locking nut on the top of the bar. Check that the screws are loose enough to allow the washers under the screw heads to slide sideways.

When the blades are correctly adjusted the play between the blades should be 0,2–0,4 mm, measured at the screws.

The edges of the blades are too hard to be filed. Dull blades should be sharpened using a grinder.

Replace the blades if they are bent or damaged.

Blade guard

(327HDA65)

The blade guard (A) is intended to protect against any part of the body coming into contact with the blades (B).

A

B

Check that the blade guard is not damaged or distorted. Replace the blade guard if it is bent or damaged.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 327HDA65X-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentHand guard Stop switchVibration damping system MufflerBlade guard BladesGear Adjusting the harness AssemblyFitting the hand guard and loop handle Fitting the handleFitting the impact guard Fuel safety Fuel HandlingFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping Safety instructions while working Safety instructions regarding the surroundingsWorking Techniques General working instructionsSafety instructions after completing work Basic working techniquesChanging the hedge trimmer angle Transport position When you adjust the angle. The bladesAre sharp and you could easily cut YourselfMaintenance CarburetorMuffler Spark plug Cooling systemAir filter Cleaning the air filterGear Oiling the air filterCleaning and lubrication Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataYour Warranty Rights and Obligations Emission Warranty Parts List Original instructions 1155690-95

327HE4, 327HDA65, 327HE3 specifications

Husqvarna is a well-known brand that has consistently delivered high-quality outdoor power equipment. Among its impressive lineup are the Husqvarna 327HDA65, 327HE4, and 327HE3, which are designed for professional use in maintaining landscapes. These handheld hedge trimmers are equipped with advanced features and technologies that make them stand out in a competitive market.

The Husqvarna 327HDA65 is a robust hedge trimmer designed for heavy-duty use. It features a powerful 25cc engine that provides excellent performance without sacrificing fuel efficiency. The dual-action blades are engineered for precision cutting, and with a cutting length of 65 cm, they can handle a variety of hedge sizes and shapes. The trimmer also incorporates an anti-vibration system, which reduces operator fatigue during extended use. Additionally, the adjustable rear handle allows for comfortable operation in various cutting positions.

The Husqvarna 327HE4 is another great option, built with a focus on versatility and ease of use. This model is equipped with a split shaft design, enabling easy transport and storage without compromising on performance. The 327HE4 uses a powerful 25cc engine similar to the 327HDA65 and features a high-efficiency cutting system with laser-cut and hardened blades for a smoother cutting experience. Its unique design allows for greater maneuverability, making it ideal for intricate trimming tasks. The anti-vibration technology further enhances comfort during prolonged work sessions.

Lastly, the Husqvarna 327HE3 offers compactness and functionality. This model is designed for homeowners and professionals alike who need a lighter tool without sacrificing performance. It features a lightweight design combined with a powerful engine, offering an excellent power-to-weight ratio. The shorter length of its cutting blade makes it perfect for delicate work, while its low noise levels ensure that users can work early in the morning or late into the evening without disturbing the neighborhood.

All three models come equipped with advanced technologies, including the Smart Start system for easy engine starting, making them user-friendly for both novice and experienced operators. Safety features such as the throttle lock ensure secure operation, while the ergonomic design reduces strain during use. The Husqvarna 327HDA65, 327HE4, and 327HE3 are exemplary choices for those looking to invest in reliable, high-performance hedge trimmers that combine innovation, comfort, and cutting efficiency for pristine landscape maintenance.
Top Page Image Contents