Link ELECTRONICS, INC | Link electronic 812-OP/E instruction

A PRODUCT OF THE GENFLEX SYSTEM

LINK ELECTRONICS, INC.

AES ANALOG TONE GENERATOR

812-OP/E

For Future Generations

The GenFlex 812-OP/E is a high performance 24 bit digital and analog audio generator. The 812- OP/E is a single module for use with the SPG-812 GenFlex frame. This unit is designed to perform two basic functions. The first basic function of this module is to produce a single AES/EBU digital audio signal for use as a digital audio reference or digital tone source. Second, it is to produce a balanced stereo analog audio signal of up to +28dBu for use as a test tone.

The generator has a set of features designed to make it fit into a wide variety of applications. These features include genlocking of the audio to digital or analog video within the Genflex frame. Also, the user may select to have this module free run with its high stability oscillator.

The user may select the amplitude and frequency of the audio tone from a fixed set of 8 combinations. Within this set of eight there are three frequencies (1KHz, 400Hz, 60Hz) and three levels (0dBFS, -10dBFS, -20dBFS)*. With this, the module has the ability to produce “digital silence” while producing one of the eight combinational tones on the output.

There are two digital outputs, one conforming with the AES3-ID interconnection standard and the other with AES3-1992 interconnection standard. The analog output consists of screw-type terminal block connections for balanced stereo audio.

The level of the analog audio tone can be adjusted in 2dB increments in reference to the digital audio with internal rotary switches. This generator runs at the professional sample rate frequency of 48kHz. LEDs are used to indicate tone frequency and level, digital silence, lock status, and power indication. Further, the user has control of some of the user status bits through dip switches on the module.

Internally, the creation of the audio tone is done with a 24 bit audio “wave table” stored in ROM. The output from the ROM is formatted and output as digital audio. The analog output is created by digital to analog conversion. This is done with a high performance one-bit delta-sigma DAC with a 128x oversampled forth-order modulator.

The GenFlex audio generator is built with quality throughout the unit. The analog audio signal path consists of surface mount thick film resistors to achieve low noise and high quality audio characteristics. Further, with its ability to produce 24 bit digital audio, it can produce the highest resolution audio available in the AES3 format. The 812-OP/E is an addition to Link’s GenFlex family of analog/digital generator products. It is designed to reside in LINK's SPG-812 frame in the audio slot with a possible total of five other video modules.

*60Hz tone has 2 levels (0dBFS and -20dBFS). The other tones have three levels.

LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668

Phone 573 334 4433 FAX 573 334 9255

812-OP/E specifications

The Link Electronics 812-OP/E is a versatile and high-quality openGear® compliant module designed for broadcast and professional AV environments. This unit is lauded for its exceptional performance in signal processing, ensuring reliable transmission of video, audio, and data signals in complex workflows.

One of the key features of the 812-OP/E is its ability to handle multiple video formats seamlessly. The module supports a range of standard video resolutions, including SD, HD, and 4K, making it an indispensable tool for facilities transitioning to higher-definition workflows. This flexibility enhances its attractiveness to broadcasters who demand reliability and high-quality outputs.

The module employs advanced technologies for signal processing, including low-jitter clock regeneration and precise signal timing management. This ensures that the output signals maintain their integrity over long distances, which is crucial for live broadcasts and remote productions where signal quality can significantly impact the viewer experience. The 812-OP/E also features automatic signal detection, simplifying the setup process and enhancing user experience.

In terms of connectivity, the Link Electronics 812-OP/E is equipped with multiple input and output options, including BNC connectors and optional fiber optic interfaces. This wide range of connectivity ensures compatibility with existing equipment, providing users the flexibility to integrate this module into various setups without extensive modifications.

Another standout characteristic of the 812-OP/E is its user-friendly interface. The module includes an intuitive LCD display, which allows for easy monitoring of signal status and quick adjustments to settings. Additionally, the module supports remote control capabilities, enabling users to manage operations from off-site locations through networking solutions.

The 812-OP/E also emphasizes energy efficiency with a design focused on reduced power consumption while maintaining high performance. This is particularly valuable in broadcast environments where equipment runs continuously and energy costs can be significant.

Overall, the Link Electronics 812-OP/E stands out as a robust, reliable, and efficient solution for modern broadcasting needs. With its range of features, compatibility with various formats, and advanced signal processing technologies, it sets a benchmark for excellence in the field. Whether in the studio or on location, the 812-OP/E provides the necessary tools for high-performance broadcast operations.