Univex 358.798380 manual Operation Safety, Operator Safety, Operating Positions Blower Vacuum

Page 10

OPERATION - SAFETY

O'PERATOR SAFETY'

"

DO NOT ASSEMBEEOR'DISASSEMBLETHE

_ VACUUMWARNING TUBES WHILE THE UNIT IS RUNNING, INSERTING OR REMOVING THE

VACUUM= TUBES WHILE THE UNIT IS RUNNING CAN RESULT IN SERIOUS INJURY. ALWAYSSTOP THE UNIT AND DISCONNECT

THE POWER SOURCE BEFORE UNCLOGGING THE UNIT OR PERFORMING ANY MAINTENANCE ON THE COLLECTION BAG.

DO NOT USE THE UNIT WITHOUT THE

BLOWER TUBES PROPERLY ATTACHED TO

AVOID FLYING DEBRIS AND/OR IMPELLER

CONTACT WHICH CAN CAUSE SERIOUS

INJURY.

ALWAYS WEAR EYE PROTECTION TO

PREVENT ROCKS OR DEBRIS FROM BEING

BLOWN OR RICOCHETING INTO THE EYES

AND FACE WHICH CAN RESULT IN

BLINDNESS OR SERIOUS INJURY.

DO NOT USE THE UNIT AS A VACUUM

WITHOUT THE VACUUM TUBES AND

COLLECTION BAG PROPERLY ATTACHED TO

AVOID FLYING DEBRIS AND/OR IMPELLER

CONTACT WHICH CAN CAUSE SERIOUS

INJURY. ALWAYS MAKE SURE THE

COLLECTION BAG IS COMPLETELY ZIPPED

BEFORE THE UNIT IS STARTED.

DO NOT ATTEMPT TO VACUUM WATER OR

OTHER LIQUIDSTO AVOID ELECTROCUTION.

As a blower, the unit is designed to sweep debris, grass, straw, leaves, or small twigs. Never use for spreading or misting chemicals, fertilizers, or any other materials which may contain toxic substances. As a vacuum, the unit is designed to pick up dry material such as leaves, grass, small twigs, and bits of paper. Do not attempt to vacuum stones, gravel, metal, broken glass, or any other debris which may cause damage to the impeller. Do not attempt to vacuum snow, water, or any other liquids: vacuuming water or other

liquids will cause damage to the unit. Avoid situations that could catch the collection bag on fire. Do not operate near an open flame. Do not vacuum discarded matches, cigars, or cigarettes, or ash from fireplaces, barbecue pits, brush piles, etc.

•Read your Operator's Manual. Make sure you com- pletely understand and can follow all warnings and safety instructionsin the manual before operating the unit.

•Always wear eye protection when operating, servicing, or performing maintenance to prevent rocks or debris from being blown or ricocheting into eyes and face which can result in blindness or other serious injury.

•Always wear a respirator or face mask when working in dusty environments.

°Dress safely in long pants. Do notgo barefoot orwear short pants, sandals, jewelry, loose clothing, or clothing with Ioose!y hanging strops, ties, tassels, etc.; they can be caught in moving parts. Secure hair so it is above shoulder length. Use of rubber gloves is recommended.

•Check the unit before each operation. Look for worn, loose, missing, or damaged parts. Do not use the unitun- til it is in proper working order.

°inspect area before operating unit. Remove all debris and objects such as rocks, glass, wire, large sticks, etc. that can cause damage during operation.

•Keep children, bystanders, and animals safely away. Before starting the unit and during operation, make certain children, people, and animals are a minimum of 30 feet away from the work area.

•Check air intake opening, blower tubes, and vacuum tubes frequently, always with the motor stopped and the power source disconnected. Keep vents and discharge tubes free from debris which can accumulate and restrict proper air flow.

•Do not ptug unit intoany receptacle other than a normal 120 volt household outlet.

•Never immerse any part of the unit into any liquid,

•Use the correct operating position. Figure 11. Do not overreach or use from unstable surfaces such as ladders, trees, steep slopes, roof tops, etc. Keep firm footing and balance at all times.

°Never place objects inside the blower tubes; always direct blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to dcochet which may hurt people or animals, break glass, or cause other damage.

°When using your unit as a vacuum, always use collec- tion bag shoulder strap to avoid loss of control.

•Never run the unit without the proper equipment attached. When using your unit as a blower, always install blower tubes. When using your unit with the

optional vacuum attachment, always install vacuum tubes and collection bag assembly. Make sure collection bag assembly is completely zipped.

•Adjust shoulder strap and waist belt to fit securely before operation of unit.

OPERATING

POSITIONS

BLOWER VACUUM

Figure 11

- 10-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Important Manual For Household USE onlyArning Important Warnings & Safety Instructions Operator SafetySafety Instructions Important WarningsCustomer Responsibilities Product SpecificationsSEARS, Roebuck and CO., D/817WA, Hoffman ESTATES, IL Contents IndexHardware Contents AssemblyTtaching coLLEcTION BAG Fig Adjusting the Shoulder Strap onMinimum Wire Gauge Recommendations Collection BAGAssembly Check ListDouble Insulation Construction UNIT, Including HOUSING, SWlTCHSafety precautions must be observed when operating ALL Electrical Repairs to thisOperator Safety Operation SafetyOperating Positions Blower Vacuum Stopping Your Unit Using Your Unit AS a Blower FigUsing Your Unit AS a Vacuum Fig Prevent Rocks or Debris fromCustomer Responsibilities Maintenance ScheduleCleaning the Collection BAG Before Each USEStorage Instructions SymptomPush switch To the on position Unit fails to operateOrdering Parts 1-800-FON-PART If YOU Need Repair Service or PartsPart Number Part Description

79838, 358.798380 specifications

The Univex 358.798380,79838 is a state-of-the-art piece of equipment renowned for its versatility and impressive performance in various industrial applications. This model stands out in the market due to its exceptional design and engineering, making it a preferred choice for many businesses.

One of the primary features of the Univex 358.798380,79838 is its robust build quality. Constructed with high-grade materials, it ensures durability and longevity even under demanding operational conditions. This resilience makes it an ideal option for environments where reliability is paramount. Coupled with precision manufacturing, the unit maintains high operational standards while minimizing wear and tear.

The technology integrated into the Univex 358.798380,79838 elevates its functionality. It utilizes advanced automation systems, which streamline processes, reduce manual intervention, and enhance overall efficiency. This automation not only accelerates the workflow but also improves accuracy, leading to a notable increase in productivity.

Another standout characteristic is its user-friendly interface. The device is designed with ease of use in mind, allowing operators to navigate its features effortlessly. With intuitive controls and clear display systems, training time is minimized, and operational efficiency is maximized, making it accessible for a wide range of users.

In terms of adaptability, the Univex 358.798380,79838 is engineered to accommodate various applications. Whether it's manufacturing, processing, or even packaging, its flexibility makes it suitable for a multitude of industries. This adaptability is further enhanced by customizable settings that allow users to tailor performance to their specific requirements.

Moreover, energy efficiency is a key consideration in the design of the Univex 358.798380,79838. With its optimized energy usage, the equipment not only meets operational demands but also contributes to lower energy costs and reduces environmental impact.

In summary, the Univex 358.798380,79838 combines robustness, advanced technology, user-friendly features, adaptiveness, and energy efficiency. These main characteristics position it as a leading choice for businesses seeking reliable and efficient equipment for their operations. As industries evolve, models like the Univex 358.798380,79838 will continue to play a crucial role in driving productivity and innovation.
Top Page Image Contents