Panasonic EP1273 Backrest does not return to the upright position, Unit will not operate at all

Problem

Cause and Remedy

Reclining does not take place even though a massage is started in pre-programs.

(The seat does not automatically recline.)

H	In some cases the seat may not automatically recline
	depending on the position (angle) of the backrest or
	the legrest.	(See Page 11)

The backrest does not return to the upright position.

H	The backrest will not return to the upright position if
	the timer is activated or the	button is pressed.

(Pressing twice will return the backrest to its original position.)

		(See Page 19)
It is not possible to switch from Swedish and	H	Switching can be hindered when the user’s body
Knead to Hawaiian and Compression.		weight is not resting on the massage heads. Shift
		your weight so that your body is contact with the
		massage heads.

The legrest will not return to its original position.

H	If the length of the legrest has been extended, the
	legrest will strike the floor, preventing from returning
	to its original position. Try again after retracting it to
	its original length.

The unit will not operate at all.

H	• The power cord has been disconnected.
	(See Page 8)

•The power switch on the unit has not been turned on. (See Page 8)

•A Pre-Program button or Manual Operation button hasn’t been pressed after pressing .

(See Pages 11, 14)

The unit has been damaged.

H Stop using the unit immediately.

The power cord or power plug is abnormally	H Stop using the unit immediately.
hot.

23