Ryobi Outdoor P2600 manual Replacing Blades, Removing the Blade, Blade Cover Screws, Cams Pins

Page 15

MAINTENANCE

WARNING:

Blades are sharp. When handling the blade assembly, wear non-slip, heavy-duty protective gloves. Do not place your hand or fingers between blades or in any position where they could get pinched or cut. NEVER touch blades or service unit with battery pack installed.

REPLACING BLADES

See Figures 8 - 9.

Periodically inspect the blades for damage and wear. Always use the manufacturer’s specified replacement blades.

REMOVING THE BLADE

n Remove the battery pack from the hedge trimmer.

n Place the hedge trimmer upside down on a workbench

and remove the four (4) blade cover screws.

n Remove the blade cover.

n Remove the bar plate from the two pins.

n Remove the retaining ring, washer, and retaining plate.

n Align the cams.

BLADE

COVER

SCREWS

BLADE COVER

Fig. 8

NOTE: The yokes cannot be lifted unless they clear the

lip of the cams.

n Remove the four (4) blade screws.

n Each blade has an oval yoke attached at one end. Slide

the blades into position so the yokes align. Remove the

blade from the housing.

INSTALLING A NEW BLADE

�Before installing a new blade, apply a lithium-based grease to the areas indicated.

n

Align the cams.

n Place the new blade on the housing and align the yokes

 

to drop into place. Rotate the blade so that it drops past

 

the lower cam.

 

NOTE: When properly aligned, the blade assembly fits in

CUTTER BLADE

ASSEMBLY

YOKES

BLADE SCREWS

BAR PLATE

RETAINING

RING

WASHER

RETAINING

PLATE

APPLY GREASE

TO THESE

AREAS

the recessed slot in the motor housing.

n Reinstall the four (4) blade screws and tighten securely.

n Reinstall the retaining plate, washer, and retaining ring.

n Reinstall the bar plate over the two pins.

n Install the blade cover using the four (4) blade cover

screws. Tighten securely.

WARNING:

Make sure the bottom plate is replaced before inserting the battery pack and starting the hedge trimmer. Failure to do so will expose internal parts, which could cause an accident or electrical shock, resulting in serious injury.

NOTE: If binding occurs after replacing the blade assembly, repeat the steps under Removing the Blade and Installing the Blade.

CAMS

PINS

Fig. 9

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules Battery SafetyModel Battery Pack P100 Charger P110 Safety Rules for Charger Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceFeatures Assembly UnpackingPacking List Applications Charging the Battery PackCharging a Cool Battery Pack OperationCharging a HOT Battery Pack To Install Battery PackTo Remove Battery Pack Holding the Hedge Trimmer Switch TriggerStarting the Hedge Trimmer Stopping the Hedge TrimmerSee Figures 6 Operating TipsMaintenance Removing the Blade Installing a NEW BladeCams Pins Replacing BladesLubricating the Blade Sharpening the BladeCutting Blade Guard Storing the Hedge Trimmer Cleaning the Hedge TrimmerService Model NO. and Serial no

P2600 specifications

The Ryobi Outdoor P2600 is a powerful and versatile tool designed to meet a wide range of outdoor maintenance needs. With its user-friendly design and robust features, it has become a go-to option for both DIY enthusiasts and professional landscapers.

At the heart of the P2600 is a reliable 26cc 2-stroke engine that delivers ample power for various tasks, including trimming, edging, and clearing debris. This engine is engineered for efficiency, ensuring that you can complete your yard work without frequent refueling. Its lightweight construction allows for easy maneuverability, making it less taxing on the user during extended usage.

One of the standout features of the Ryobi P2600 is its innovative Easy Start technology. This system simplifies the starting process, reducing the pull force required to start the engine. As a result, even inexperienced users can easily fire up the tool, minimizing frustration and downtime.

The P2600 also incorporates a dual-line spool system, which provides a broader cutting width for faster trimming. With its 16-inch cutting path, you can tackle larger areas in less time, making your yard work more efficient. The trimmer head is designed for easy line replacement, ensuring that you can quickly get back to work without the hassle of complicated setups.

In terms of comfort, the tool is equipped with an adjustable handle that allows you to find the perfect angle for your trimming tasks. This feature helps reduce strain on your arms and back, making it a more enjoyable experience. Additionally, the soft-grip handle adds extra comfort, contributing to overall user satisfaction.

Durability is another key characteristic of the Ryobi P2600. The materials used in its construction are designed to withstand the rigors of outdoor use, ensuring longevity and reliable performance. Its design also incorporates a protective guard to shield the engine and other components from debris, further enhancing its durability.

With a combination of power, ease of use, and advanced technology, the Ryobi Outdoor P2600 is ideal for anyone looking to maintain their yard effectively. Its thoughtful design and features make it a powerful ally in achieving a beautifully landscaped outdoor space. Whether you are tackling tough weeds or simply maintaining your lawn's aesthetics, the P2600 is a reliable choice for all your trimming and edging needs.
Top Page Image Contents