SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | EXPLANATION |
| Safety Alert Symbol | Precautions that involve your safety. |
| Read Your Operator’s Manual | To reduce the risk of injury, user must read and understand |
| manual before using this product. | |
|
| |
| Wear Eye and Hearing | Wear eye protection which is marked to comply with ANSI Z87.1 as |
| Protection | well as hearing protection when operating this equipment. |
50' 15m | Keep Bystanders Away | Keep all bystanders at least 50 ft. (15 m) away. |
| Ricochet | Thrown objects can ricochet and result in personal injury |
| or property damage. | |
|
| |
| Blade Thrust | Beware of blade thrust. Products authorized for blade use will display |
| this symbol to warn of blade thrust. | |
|
|
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL | MEANING | |
|
| |
DANGER: | Indicates an imminently hazardous situation, which, if not avoided, will result | |
in death or serious injury. | ||
| ||
|
| |
WARNING: | Indicates a potentially hazardous situation, which, if not avoided, could result | |
in death or serious injury. | ||
| ||
|
| |
CAUTION: | Indicates a potentially hazardous situation, which, if not avoided, may result | |
in minor or moderate injury. | ||
|
(Without Safety Alert Symbol) Indicates a situation that may result in property
CAUTION: damage.
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts.
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
5