Ryobi RY30570, RY30931 manual Attaching the Front handle CS30 and SS30, Attaching the J Handle BC30

Page 12

ASSEMBLY

ATTACHING THE FRONT handle - CS30 and SS30

See Figure 4.

Remove wing nut, washer, and bolt from the front handle.

Install the front handle onto the top side of the drive shaft housing in the area indicated by the label.

NOTE: The open side of the handle should face the operator. 

Place the bolt through the front handle.

NOTE: The hex bolt head fits inside the hex recess molded into one side of the handle.

Reinstall the washer and wing nut.

Tighten wing nut securely.

ATTACHING THE “J” HANDLE - BC30

See Figure 5.

A “J” handle must be used for ensuring the best control and maximizing operator safety when using a brushcutter.

Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the operator’s left.

Insert the end of the handle between the clamps.

Align the bolt holes and push the long bolt (1/4-20 x 1-1/2 in.) through the handle side.

Place short bolt (1/4-20 x 1 in.) through opposite side of clamp. Install flat washers, lock washers, and hex nuts to hold the assembly in place.

After assembly is complete, adjust the position of the handle to the area indicated by the label on the drive shaft housing.

Tighten first the long bolt and then the short bolt.

FRONT HANDLE

BOLT

WASHER WING NUT

Fig. 4

 

bolt

 

FRONT

1/4-20 x 1 in.

bolt

 

 

1/4-20 x 1-1/2 in.

HANDLE

 

 

 

strap hanger

CLAMP

CLAMP

FLAT WASHER

 

LOCK WASHER

HEX NUT

Fig. 5

12

Image 12
Contents Save this Manual for Future Reference BC30 RY30570 RY30971Table of Contents IntroductionGeneral Safety Rules Read all instructionsSpecific Safety Rules Specific safety rules for trimmer useSpecific safety rules for brush- cutter and blade use Symbols Symbol NameExplanation Service Symbol Signal MeaningFeatures CS30Primer BulbSS30 BC30Handle Know Your String Trimmer Ergonomic DesignGrass Deflector TOP-MOUNTED MotorAssembly UnpackingPacking list InstallING the Power Head to the Attachment Removing the attachment from the power headAttaching the Storage Hanger See FigureAttaching the Front handle CS30 and SS30 Attaching the J Handle BC30Attaching the Grass Deflector To attach the curved shaft grass deflector CS30To attach the straight shaft grass deflector SS30 Attaching the brushcutter Guard BC30Attaching the Shoulder harness BC30 Converting from Brushcutter to string trimmer BC30Removing the Tri-Arcblade and brushcutter guard Converting from String Trimmer to Brushcutter BC30Installing the Tri-ArcBlade and brushcutter guard OperationRemoving the straight shaft grass deflector and String head Fueling and Refueling the trimmer Oxygenated FuelsFuel Mixture High quality 2-cycle engine lubricant Gasoline LubricantOperating the Trimmer ProperOperating PositionTo Advance the Cutting Line reel easy string head Cutting TipsGrass Deflector Line Trimming CUT-OFF Blade See Figures 16Operating the Brushcutter Blade ThrustTri-ArcBLADE Cutting Technique BladeStarting and Stopping See Figures 21Throttle Throttle TriggerMaintenance General MaintenanceInstalling reEl easy string head See Figures 24Installing string in reel easy string head Installing pro cut II string headSee Figures 26 Installing string in pro cut II string head Cleaning the Exhaust Port and Muffler Spark ArrestorIdle Speed Adjustment Idle Speed ScrewSpark Plug replacement Fuel CAPStoring the Product CoverTroubleshooting Gap. Refer to Spark Plug Replacement earlierSpeed. See Figure Idle Speed Screw AIR Filter CoverWarranty This product was manufactured with a catalyst mufflerLimited Warranty Statement MANUFACTURER’S Warranty Coverage Page Parts and Service California Proposition

RY30931, RY30951, RY30971, RY30570 specifications

The Ryobi RY30570, RY30971, RY30951, and RY30931 are innovative outdoor power tools designed to enhance efficiency and performance in yard maintenance and landscaping tasks. Ryobi, a well-known brand in the power tool industry, aims to provide gardeners and homeowners with reliable equipment that combines cutting-edge technology and ergonomic design.

The Ryobi RY30570 is a powerful 2-cycle gas trimmer that excels in tackling overgrown grass and weeds. Featuring a 30cc engine, it delivers robust performance while maintaining a lightweight design for easy maneuverability. With its Straight Shaft, users can comfortably reach under bushes and around obstacles. The RY30570 also boasts an Easy Start technology, ensuring hassle-free ignition with a minimal pull effort.

On the other hand, the Ryobi RY30971 is a versatile brush cutter equipped with a 40V battery for eco-friendly performance. Its Brushless motor provides longer runtime and improved efficiency, allowing users to complete larger tasks without frequent recharges. The adjustable handle enhances comfort during extended use, while the 16-inch cutting width helps cover more ground quickly.

The RY30951 is Ryobi's innovative cordless string trimmer that operates on a 40V lithium-ion battery. This model is designed for noise-sensitive environments as it operates quietly and emits zero emissions. The Turbo Mode feature allows users to tackle even tougher weeds without experiencing a decrease in power. Additionally, the user-friendly design includes an adjustable telescoping shaft that caters to various operator heights.

Lastly, the Ryobi RY30931 is an advanced lawn mower that combines a powerful 40V brushless motor with advanced cutting technology. It features a 21-inch deck that provides a wide cutting path, offering swift mowing capabilities for larger lawns. Users will appreciate the 5-position height adjustment, allowing for personalized cutting preferences. The mower's foldable handles make storage easy, and the digital control panel monitors battery life and performance.

Overall, the Ryobi RY30570, RY30971, RY30951, and RY30931 models reflect the brand's commitment to quality and innovation. With features like easy starting mechanisms, battery efficiency, user-friendly designs, and eco-conscious operation, these tools are perfect for homeowners and landscape professionals alike, making yard tasks more manageable and efficient.