MAINTENANCE
Remove the cupped washer and the blade.
To install blade:
Place flanged washer over the gear shaft with the hollow side toward the brushcutter guard.
Center the blade on the flanged washer, making sure the blade fits flat and the raised hub goes through the hole in the blade.
Install the cupped washer with the raised center away from the blade.
Place the blade nut onto the gear shaft.
Insert the head locking tool through the flanged washer and gear head.
Install the blade nut by turning it counterclockwise (left- handed threads).
Tighten the blade nut and torque to 120 in.lb. minimum (finger tight plus 1/2 turn).
ATTACHING THE STORAGE HANGER
See Figure 9.
There are two ways to hang the attachment for storage.
To use the hanger cap, push in the button and place the hanger cap over the end of the attachment shaft. Slightly rotate the cap from side to side until the button locks into place.
The secondary hole in the attachment shaft can be used for hanging purposes as well.
STORING THE ATTACHMENT
Clean the attachment thoroughly and lubricate before storing.
Store the attachment in a dry,
Keep away from corrosive agents such as garden chemi- cals and
MAKE THE MOST OF YOUR PURCHASE!
Go to www.ryobitools.com and register your new tool
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the Ryobi Help Line!
To register your Ryobi product by regular mail, please print the following information on a 3 in. x 5 in. card or standard postcard: your name, mailing address, phone numbers, email address, Ryobi product(s) purchased with item number from package, and serial number for each product. Mail the card to: Techtronic Industries North America, Inc., Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson, SC 29625.To receive infor- mation on our company and products, please include the following statement on your registration card: “Send me information on your products and company using the contact information I am providing with this product registration.”
9 — English