Ryobi RY09973 manual Filling the Tank, Starting and Stopping, Switch Throttle Trigger

Page 11

OPERATION

FILLING THE TANK

WARNING:

Always stop the engine before filling the fuel tank. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from the refueling area before starting engine. Do not smoke while filling the tank.

Clean the surface around the fuel cap to prevent contami- nation.

Loosen the fuel cap slowly, by turning it counter- clockwise.

Pour the fuel mixture carefully into the tank.

Clean and inspect the fuel cap gasket before replacing the fuel cap.

Replace the fuel cap and tighten it by turning it clock- wise.

Wipe spilled fuel from the product.

Move at least 30 ft. away from refueling area before start- ing the product.

WARNING:

Check for fuel leaks. If you find any leaks, correct the problem before using the product.

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately.

STARTING AND STOPPING

See Figures 6 - 7.

NOTE: It is normal for smoke to be emitted from a new engine during first use.

To start an engine that is cold or has run dry:

nFill the fuel tank, if necessary. Always use the proper oil/gasoline mixture. See Mixing the Fuel on page 10.

nDisengage the cruise control lever.

NOTE:  Do not engage the throttle trigger during the starting process.

nSlowly push the primer bulb seven times.

nSet the choke lever to the START position.

NOTE:  If restarting a warm engine, leave the choke lever in the RUN position.

Pull the starter cord until the engine runs.

Return the starter cord gently to the starter housing. Do not allow the rope to snap back.

Allow the engine to run for 15 seconds to warm up before using.

Engage the throttle trigger to operate.

To stop the blower:

Release the throttle trigger.

Press and hold the engine switch to the “O” or STOP posi- tion.

To remove blower:

Move harness straps off the shoulders. Let straps slide down arms.

Grasp the straps and lower the blower to the ground.

engine

SWITCH

THROTTLE

TRIGGER

CRUisE CONTROL (THROTTLE LOCK)

Fig. 6

choke

chokelever lever

start

 

position

run

 

position

Fig. 7

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsService General Safety RulesRefueling Specific Safety RulesSymbol Name Explanation SymbolsSymbol Signal Meaning Throttle Triggernozzle THrottle control handle tube Product SpecificationsMesh Backing Engine switch Waist Shoulder StrapAssembly FeaturesThrottle control handle tube Cable Cable tie Assembling the Blower TubesStraight Tube Mixing the fuel Adjusting Harness and waist StrapsAdjusting Throttle control handle OperationStarting and Stopping Switch Throttle TriggerFilling the Tank THROTTLE Trigger Operating the BlowerTo engage the cruise control/throttle lock Proper operating positionAIR Filter MaintenanceGeneral Maintenance Replacing and cleaning air filterSpark Plug Cleaning the Exhaust Port and MufflerSpark Arrestor Fuel CAPProblem Cause Remedy TroubleshootingAccessories Limited Warranty Statement WarrantyMANUFACTURER’S Warranty Coverage Fuel Tank Assy Emissions Maintenance Schedule and Warranted Parts ListAIR Filter Assy Carburetor AssyPage California Proposition Parts and Service

RY09973 specifications

The Ryobi RY09973 is a powerful and versatile tool that has garnered attention for its robust features and ease of use. Designed for both professionals and DIY enthusiasts, this portable generator is equipped to handle a variety of tasks, making it an ideal choice for outdoor events, job sites, and emergency backup.

One of the standout features of the RY09973 is its impressive power output. With a 4-stroke engine, it delivers a steady 2,300 watts of running power and can surge up to 2,800 watts. This capability makes it suitable for running essential appliances like refrigerators, lights, and power tools simultaneously. Its compact size and lightweight design allow users to transport the generator easily, making it perfect for those on the go.

The RY09973 is also designed with user-friendly technology that enhances its performance. It comes equipped with a built-in inverter that ensures clean and stable power, a crucial feature for sensitive electronics. This inverter technology ensures that devices such as smartphones, laptops, and medical equipment can be charged and powered safely without the risk of damage from voltage spikes.

Another noteworthy characteristic is the generator’s fuel efficiency. The RY09973 has a 1.06-gallon gas tank that can provide up to 10 hours of continuous operation at a quarter load. This extended runtime means fewer trips to refuel, allowing users to focus on their tasks without interruptions.

Moreover, the RY09973 features an easy-start system that allows for quick and hassle-free ignition, even in cold weather conditions. With the combination of recoil start and a simple control panel, users can operate the generator efficiently, making it accessible even for those who may not have prior experience with generators.

Safety is a priority with the RY09973, which includes multiple safety features such as a circuit breaker and low oil shutdown. These elements help prevent damage to the generator and connected devices, ensuring peace of mind during operation.

In conclusion, the Ryobi RY09973 stands out in the portable generator market with its balance of power, efficiency, and user-centric design. Whether for recreational use or as a reliable backup during emergencies, it is a dependable choice that meets the diverse needs of its users, making it a smart investment for anyone in need of a portable power solution.
Top Page Image Contents