Porter-Cable D26981-028-0 instruction manual Storage, Engine Preparation, Generator

Page 15

STORAGE

If you are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

Never store generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach

an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or other gas appliances.

ENGINE PREPARATION

1.Add fuel stabilizer to fuel tank to minimize the formation of fuel gum deposits during storage.

2.Run engine at least 10 minutes after adding stabilizer to allow it to enter the fuel system.

3.Next shut off engine.

4.Disconnect the spark plug wire and remove the spark plug.

5.Add one teaspoon of oil through the spark plug hole.

6.Place rag over spark plug hole and pull the recoil a few times to lubricate the combustion chamber.

7.Replace the spark plug, but do not connect the spark plug wire.

NOTE: If a fuel stabilizer is not used, all gasoline must be drained from the tank and carburetor to prevent gum deposits from forming on these parts and causing possible malfunction of the engine.

GENERATOR

•Clean the generator as outlined in the Maintenance Section on this manual.

•Check that cooling air slots and openings on generator are open and unobstructed.

15- ENG

D26981

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Generator Consumer Safety Information Consumer General and Service InformationRisk of Electrocution and Fire Safety Guidelines / DefinitionsImportant Safety Instructions When installing a DoubleGenerator in rain When damagedRisk of Electrocution and Fire OperationRisk of Fire Unit Indoors or in ANYConfined Area Risk of Unsafe Operation Risk of Breathing Inhalation HazardRisk of HOT Surfaces Specifications Risk of Moving PartsRisk from Lifting Grounding the Generator AssemblyRemove Generator from Carton Other Loose PartsDouble Throw Transfer Switch Obtaining Electricity from the GeneratorExtension Cords Operation To Start the Engine Stopping Engine Connecting Electrical LoadsCustomer Responsibilities Table MaintenanceEngine Maintenance Generator MaintenanceStorage Engine PreparationGenerator Determining Wattage Requirements Wattage CalculationsStarting Wattage Requirements Application GuideAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyENG D26981 Quick Facts

D26981-028-0 specifications

The Porter-Cable D26981-028-0 is a premier heat gun designed for various applications in construction, renovation, and DIY projects. Known for its powerful performance and robust design, this tool is favored by professionals and hobbyists alike.

One of the standout features of the D26981-028-0 is its adjustable temperature settings. It comes equipped with a variable temperature control that allows users to select precise heat levels ranging from 120°F to a scorching 1,000°F. This versatility makes it suitable for tasks such as removing paint, thawing pipes, bending plastics, and shrinking wrap, allowing users to tackle a wide array of projects with ease.

In addition to its temperature control, the heat gun is designed with two airflow settings. This feature enables users to choose between low and high airflow, offering greater flexibility depending on the project's requirements. The low setting provides a gentle flow of heat ideal for delicate tasks, while the high setting delivers an intense heat for more challenging applications.

The D26981-028-0 is engineered with advanced technology to ensure safety and efficiency during operation. A built-in overload protection feature prevents the tool from overheating, prolonging its lifespan and ensuring user safety. Furthermore, its ergonomic design includes a comfortable grip and a balanced weight, which minimizes hand fatigue during prolonged use.

Durability is a hallmark of the Porter-Cable brand, and the D26981-028-0 is no exception. Constructed from high-quality materials, this heat gun is built to withstand the rigors of daily use. Its robust housing protects internal components from damage, while the integrated stand allows for hands-free operation, enhancing convenience.

In terms of versatility, the D26981-028-0 is compatible with a variety of nozzles, further expanding its potential uses. Users can easily switch between different attachments, such as concentrator nozzles for focused heat, or reflector nozzles for heating around pipes.

In conclusion, the Porter-Cable D26981-028-0 heat gun combines powerful performance, safety features, and user-friendly design. Whether for professional use or home improvement projects, its adjustable heat settings, airflow options, and durable construction make it an essential tool for anyone looking to complete tasks efficiently and effectively.
Top Page Image Contents