Porter-Cable BSI550 instruction manual Specification, Model

Page 2

SPECIFICATION

MODEL

BSI550

HORSE POWER

10.0

RATED/SURGE WATTS

5500/9000

VOLTAGE

120/240

AMPERAGE

45.8/22.9A

PHASE

SINGLE

FREQUENCY

60 Hz

ENGINE SPEED

3600 RPM

MAX. AMBIENT TEMP.

104° F

FUEL CAPACITY

7 GALLONS

RUN TIME @ 50%/100%

13.2/8.1 HRS

•

•

This product is not equipped with a spark arresting muffler. If the product will be used around flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items, then an approved spark arrester must be installed and is legally required in the state of California. It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the Cal- ifornia Public Resources Code, unless the engine is equipped with a spark arrestor, as defined in section 4442, and maintained in effective working order. Spark arresters are also required on some U. S. Forest service land and may also be legally required under other statutes and ordinances.

This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. This warning is given in compliance with California Proposition 65, as detectable amounts of chemicals subject to proposition 65 may be contained in this product.

2 — ENG

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Generator Specification ModelWarranty This Warranty is not Transferable and does not CoverHazard What could Happen HOW to Prevent IT Risk of Electrocution and FireOperation of generator in rain Read and Understand ALL Warnings BeforeAttempting to Operate Generator Wet, icy, or flooded conditionsIndoors or in ANY Confined Risk of FireOr wall. do not Operate Unit AreaRisk of Breathing Inhalation Hazard To use a U.L. listed voltage surge Protector will void the warrantyRisk of Unsafe Operation On your generatorRisk from Lifting Risk of HOT SurfacesRisk of Moving Parts Grounding the Generator AssemblyRemove Generator from Carton Obtaining Electricity from the GeneratorOperation Stopping Engine Connecting Electrical LoadsTo Start the Engine Generator Maintenance MaintenanceEngine Maintenance Customer Responsibilities TableWattage Calculations Running Watts Starting WattsStarting Wattage Requirements Volts X Amp = Watts Volts x 10 amps = 1200 wattsHousehold Wattage Calculator Appliance or Load Device Typical Device Wattage TotalTroubleshooting Guide Problem Cause CorrectionENG ENG Generator Quick Facts Always Refer to the Manuals Supplied with this Unit

BSI550 specifications

The Porter-Cable BSI550 is a versatile and powerful tool designed for both professionals and DIY enthusiasts who need a robust solution for their fastening and drilling tasks. With its innovative features and reliable performance, the BSI550 stands out in the crowded market of power tools.

One of the main highlights of the BSI550 is its powerful motor. This tool is engineered to deliver a robust output, providing ample torque for a wide range of applications, from driving screws into hard materials to drilling through tough surfaces. With variable speed settings, users can easily adjust the speed according to the task at hand, allowing for greater precision and control.

Another impressive feature of the Porter-Cable BSI550 is its integrated clutch system. This technology helps to prevent over-tightening and stripping of screws, ensuring that each fastener is driven to the correct depth without damaging the material. This is especially beneficial for those working with delicate surfaces or smaller fasteners where precision is crucial.

The BSI550 is also designed for user comfort and convenience. Its ergonomic handle is crafted to reduce fatigue during extended use, allowing users to work for longer periods without discomfort. The lightweight design enhances maneuverability, making it easier to use in tight spaces or overhead applications.

Additionally, the tool features an LED work light that illuminates the work area, providing better visibility in low-light conditions. This feature is particularly advantageous for professionals working in dimly lit environments or for DIYers tackling projects at home in the evening.

For those who value versatility, the Porter-Cable BSI550 is compatible with a variety of bits and attachments. This adaptability makes it suitable for various tasks beyond basic drilling and fastening, expanding its functionality for diverse projects.

In summary, the Porter-Cable BSI550 is a powerful, reliable, and user-friendly tool that excels in providing both performance and comfort. Its advanced features, including a powerful motor, integrated clutch system, ergonomic design, and LED work light, make it a top choice for anyone looking to enhance their toolkit with a dependable fastening solution. Whether you are a seasoned professional or a DIY enthusiast, the BSI550 delivers impressive results and enhances productivity on the job.
Top Page Image Contents