Additional Safety Rules for Routers

8.DRESS PROPERLY. Do not wear loose clothing or jewelry. Loose clothing, draw strings and jewelry can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.

9.USE SAFETY GLASSES. Wear safety glasses or goggles while operating power tools. Also face or dust mask if operation creates dust. All persons in the area where power tools are being operated should also wear safety glasses and face or dust mask.

10.DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges. Have damaged or worn power cord and strain reliever replaced immediately. DO NOT ATTEMPT TO REPAIR POWER CORD.

11.SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool.

12.DON’T OVERREACH. Keep proper footing and balance at all times.

13.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Have all worn, broken or lost parts replaced immediately. Keep handles dry, clean and free from oil and grease.

14.DISCONNECT TOOLS when not in use, before servicing, and when changing accessories such as blades, bits, cutters, etc.

15.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.

16.AVOID UNINTENTIONAL STARTING. Do not carry a plugged-in tool with finger on switch. Be sure switch is off when plugging in. Keep hands, body and clothing clear of blades, bits, cutters, etc. when plugging in the tool.

17.OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords marked “Suitable for use with outdoor appliances – store indoors when not in use.”

18.STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired or while under the influence of medication, alcohol or drugs.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service center. Do not use tool if switch does not turn it on and off.

20.WEAR EAR PROTECTION to safeguard against possible hearing loss.

SAVE THESE INSTRUCTIONS

1.NEVER adjust depth of cut while motor is running. A slip at this time may cause personal injury, or damage to cutter or workpiece.

7536 specifications

The Porter-Cable 7536 and 7537 are two well-regarded models in the realm of woodworking and construction tools, particularly known for their versatility and reliability in a professional environment. Both models serve a distinct purpose in the tooling landscape, with the Porter-Cable 7536 functioning primarily as a heavy-duty 6-inch laminate trimmer and the 7537 primarily as a more powerful model that caters to a wider range of woodworking tasks.

One of the standout features of the Porter-Cable 7536 is its robust motor. With a 7.0 Amp motor, it delivers ample power for efficiently trimming laminate edges and performing other trim work. This tool provides a variable speed control, enabling users to adjust the RPM according to the specific material or task at hand, ultimately allowing for precision work without damaging the material. The unit is designed with a low profile and lightweight setup, which ensures enhanced maneuverability, making it easier to work in tight spaces.

The 7536 also boasts a durable base plate that enhances stability during operation, a crucial aspect when tackling delicate trimming tasks. Additionally, its clear sub-base provides visibility, allowing the operator to see the cutting line easily for accuracy. Furthermore, the model is compatible with a range of standard laminate bits, enabling craftsmen to execute a variety of applications seamlessly.

On the other hand, the Porter-Cable 7537 is equipped with even more power, featuring an 8.5 Amp motor that caters to a broader spectrum of woodworking needs. This model also includes precision depth adjustments for flawless cuts up to 1-3/4 inches deep in a single pass. The 7537 stands out for its easily adjustable depth control, which locks securely to provide repeatable accuracy, ideal for professional woodworkers who require consistency in their tasks.

Both models incorporate innovative technologies, such as the soft-start feature, which minimizes the initial torque when starting, ensuring the user has a controlled start. Reliability and ease of use are evident in their ergonomic design, reducing user fatigue during prolonged periods of work.

In summary, the Porter-Cable 7536 and 7537 are exemplary tools known for their robust performance, precise adjustments, and innovative features. Whether you're a professional contractor or a DIY enthusiast, these models promise to deliver exceptional results for a wide range of woodworking applications. They stand as a testament to Porter-Cable's commitment to producing high-quality tools that meet the demands of users across various skill levels.