Poulan 952711607, 545167664 Identification of Safety Symbols, Safety Rules, Operator Safety

Page 2

IDENTIFICATION OF SAFETY SYMBOLS

DANGER:

Blade moves momentarily after the trigger switch is released.

SThe blade can seriously cut your or others. S Allow blade to stop before removing it from

the cut.

S Do not overreach.

WARNING: This unit can be dangerous! Careless or improper use can cause serious injury.

Read the operator’s manual before use. Failure to follow instructions could result in serious injury. Save operator’s manual.

Hazard zone for thrown objects.

SBlade can throw objects violently.

SYou and others can be blinded/injured.

S Keep children, bystanders, and animals 50 feet (15 meters) away.

Blade can throw objects violently. You can be blinded or injured. Always wear hearing protection and safety glasses marked Z87. Always wear head protec- tion, heavy, long pants, long sleeves, boots and gloves.

SAFETY RULES

WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instructions.

This power unit can be dangerous! Operator is responsible for following instructions and warnings on unit and in manual. Read entire instruction manual before using unit! Be thor- oughly familiar with the controls and the prop- er use of the unit. Restrict the use of this unit to persons who have read, understand and will follow the instructions and warnings on the unit and in the manual. Never allow chil- dren to operate this unit.

SAFETY INFORMATION

ON THE UNIT

OPERATOR SAFETY

DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM BLADE AND CUTTING AREA. Do not attempt to clear away cut material or hold material to be cut when the blade is in motion. Make sure powerhead is stopped and spark plug wire is disconnected (or powerhead is disconnected from power source) when removing jammed material from the cutting blade. Do not grab or hold attachment by the cutting blade.

SDress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance on your unit (safety glasses are available). Eye protection should be marked Z87.

SAlways wear face or dust mask if operation is dusty.

2

Image 2
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Identification of Safety SymbolsSafety Rules Always wear face or dust mask if operation is dustyIng accessories and/or attachments Do not smoke or allow smoking near fuel or the powerheadNever touch the switch when connect- ing extension cord Keep handles free of oil and fuelTransporting and Storage UNIT/MAINTENANCE SafetyEdging Safety Operation Blade Depth Adjustment KnobInstalling Attachment Know Your Edger AttachmentOperating Position Installing Attachment HangerSetting the Edging Depth EdgingMaintenance Service and AdjustmentsLightly oil external metal surfaces Limited WarrantySeasonal Storage Statesville Road