5 ATTACH LOWER CHUTE (See Fig. 5)
1.Raise and hold defl ector shield in upright position.
2.Place slot in lower chute over tab on mower deck and position lower chute over deck opening as shown.
3.Hook rear latch into fl ange hole on back of mower deck.
4.Hook front latch into tab hole on front of mower deck.
CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.
DEFLECTOR
SHIELD
TAB
6 UPPER CHUTE (See Figs. 6A & 6B)
1.Lower mower deck to its lowest cutting position.
2.Assemble upper chute by inserting curved end into hole in back of cover.
NOTE: Handle carefully so as not to damage full bagger indicator.
3.Push in and turn upper chute until it is in line with lower chute.
4.Align the bosses on lower chute with alignment slots on upper chute and slide together.
5.Secure with rubber latch by hooking hole in latch over
latch pin.
FULL BAGGER | HANDLE |
INDICATOR |
|
COVER
020 | 99 | UPPER | |
CHUTE | |||
|
|
LOWER
CHUTE
2924 0
FRONT
LATCH
REAR LATCH
FIG. 5
Fig. 6A
ALIGNMENT
SLOTS
LATCH PIN
02098
RUBBER
LATCH
BOSSES
Fig. 6B
7 LEVEL MOWER DECK
Be sure deck is properly leveled for best mower perfor- mance. See your tractors owner's manual for instruc- tions.
7