Poulan PPB4000C instruction manual Trimmer Head Replacement, Blade Replacement, Seasonal Storage

Page 12

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

TRIMMER HEAD REPLACEMENT

Refer to the ASSEMBLY section for trimmer head replacement instructions and illustra- tions.

BLADE REPLACEMENT

Refer to the ASSEMBLY section for blade re- placement instructions and illustrations.

WARNING: Perform the following steps after each use:

SAllow attachment and gearbox to cool be-

fore storing or transporting.

SStore attachment with blade shield in place. Position attachment so that any sharp ob-

ject cannot accidentally cause injury.

SStore the attachment in a dry, well ventilated area out of the reach of children.

SEASONAL STORAGE

Prepare attachment for storage at end of sea- son or if it will not be used for 30 days or more. If your brushcutter attachment is to be stored for a period of time:

SClean the entire attachment.

SInspect the blade shield area and clean any dirt, grass, leaves, or debris that has col- lected. Inspect the blade and blade shield; replace a blade that is bent, warped, cracked, broken or damaged in any other way.

SLightly oil external metal surfaces.

SApply a coating of oil to the entire surface of the blade; wrap it in heavy paper or cloth.

SCheck entire attachment for loose screws or nuts. Replace any damaged, worn or

broken parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

ELECTROLUX HOME PRODUCTS, INC., warrants to the original purchaser that each new Poulan PRO! brand gasoline tool or at- tachment is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective gasoline product or attachment as follows from the original date of purchase.

2 YEARS -- Parts and Labor, when used for household purposes.

90 DAYS -- Parts and Labor, when used for commercial, professional, or income produc- ing purposes.

30 DAYS -- Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance, or the use of accessories and/or attachments not specifi- cally recommended by ELECTROLUX HOME PRODUCTS, INC., for this tool. Addi- tionally, this warranty does not cover tune- ups, spark plugs, filters, cutting line, or rotating head parts that will wear and require replace- ment with reasonable use during the warranty period. This warranty does not cover predeliv- ery setup or normal adjustments explained in the instruction manual.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR OTHER DAMAGES WILL BE ALLOWED, AND THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT THOSE EX- PRESSLY STIPULATED HEREIN.

SOME STATES DO NOT ALLOW LIMITA- TIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.

The policy of ELECTROLUX HOME PROD-

UCTS, INC., is to continuously improve its products. Therefore, ELECTROLUX HOME PRODUCTS, INC., reserves the right to change, modify, or discontinue models, de- signs, specifications, and accessories of all products at any time without notice or obliga- tion to any purchaser.

12

Image 12
Contents 530164694 12/8/03Always Wear Operator Safety UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyCarton Contents Installing Brushcutter AttachmentHandlebar Assembly Tools RequiredShoulder Strap Assembly Powerhead ENDAttachment END Installation of the Trimmer Head Configuring Your UnitAssembly Information -- Trimmer Head Attaching the Plastic ShieldAssembly Information -- Weed Blade Installation of the Metal BladeAttaching the Metal Shield Weed BladeKnow Your Brushcutter Attachment Blade Blade ShieldTrimmer Shield Trimmer Head Operating the CouplerInstalling Optional ATTACH- Ments Installing Attachment HangerOperating Position Cutting MethodsOperating Instructions for Brushcutter Attachment TrimmingScalping MowingBlade Maintenance Inspect and Clean UnitCheck for Damaged or Worn PartsTrimmer Head Replacement Blade ReplacementSeasonal Storage Policy of Electrolux Home Prod