Maintenance

Throttle Position Lever (Cruise Control)

2.Slowly press the primer bulb 6 times.

3.Move the start lever to the START position.

Start

StarterLever

Handle

Primer

Bulb

4.Pull starter rope handle sharply until en- gine starts and runs.

5.Allow unit to run for 10--15 seconds, then ful- ly squeeze the throttle trigger to disengage the starting system.

STARTING A WARM ENGINE

1.Squeeze and hold the throttle trigger.

2.Pull starter rope sharply while squeezing throttle trigger until engine runs.

NOTE: Normally, the warm starting proce- dure can be used within 5--10 minutes after the unit is turned off. If the unit sits for more than 10 minutes without being used, it will be necessary to start the unit by following the steps under STARTING A COLD ENGINE or following the starting instruction steps shown on the unit.

STARTING A FLOODED ENGINE

Flooded engines can be started by moving the start lever to the RUN position and fully squeezing the throttle trigger. Pull the starter handle repeatedly while squeezing throttle trigger until engine starts and runs. This could require pulling the starter handle many times, depending on how badly the unit is flooded. If the unit still doesn’t start, refer to the TROU-

BLESHOOTING TABLE or call 1-800-554-6723.

WARNING: Avoid touching muffler unless engine and muffler are cold. A hot muffler can cause serious burns.

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SMuffler

SSpark Plug Boot S Air Filter

S Housing Screws

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Fuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

S Vacuum Bag -- Do not use vacuum bag if it is torn or damaged.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

-- 9 --

545186830, SM210VS specifications

The Poulan SM210VS, model number 545186830, is a powerful and efficient walk-behind lawn mower designed for homeowners seeking a reliable solution for lawn maintenance. This mower combines performance, ease of use, and innovative technology, making it a valuable addition to any garden care toolkit.

One of the standout features of the Poulan SM210VS is its robust 163cc engine that delivers ample power for tackling various types of grass and terrain. The engine is equipped with a recoil start system, ensuring that users can start the mower quickly and effortlessly. Additionally, its lightweight construction enhances maneuverability, allowing users to navigate tight spots and obstacles easily.

This model features a 21-inch cutting deck, which is an optimal width for a balance between covering ground efficiently and achieving a finely manicured lawn. The steel construction of the deck ensures durability, enabling the mower to withstand the wear and tear of regular use. The SM210VS comes with a 3-in-1 cutting system that allows you to mulch, side discharge, or bag clippings, providing versatility to suit different lawn care preferences.

Adjusting the cutting height is straightforward, thanks to its 5-level height adjustment system. This enables users to customize the cutting height according to their lawn’s needs, whether it’s a low cut for aesthetics or a higher cut for health.

In terms of user comfort, the Poulan SM210VS is equipped with ergonomic handles that are designed to reduce fatigue during extended use. The handles can also be adjusted to different heights, accommodating users of varying statures. Furthermore, the mower's compact design allows for easy storage, making it a practical choice for homeowners with limited space.

Safety features are also prioritized in the SM210VS, with a blade brake that stops the cutting blade quickly when the operator releases the handle. This feature minimizes the risk of accidents, providing peace of mind during operation.

Overall, the Poulan SM210VS, 545186830, offers a blend of powerful performance, user-friendly features, and essential safety technologies, making it an excellent choice for anyone looking to maintain their lawn with minimal hassle. Its efficient design and versatile capabilities ensure a tidy, healthy lawn, contributing to the overall appeal of any property.