Poulan U4000C Assembly, Carton Contents, Tools Required, Installing Brushcutter AT- Tachment

Page 4

SPECIAL NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feel-

ing in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SAVE THESE INSTRUCTIONS

ASSEMBLY

CARTON CONTENTS

Check carton contents for the following:

SBrushcutter attachment S Handlebar

S Handlebar mounting bracket for 1shaft S Handlebar mounting bracket for 7/8shaft S Bracket cover (2)

S Shoulder strap

S Upper shoulder strap clamp

S Lower shoulder strap clamp (with spacer tabs)

S Handlebar bracket screws (4)

S Shoulder strap clamp screws (2) S Attachment hanger

S Hex wrench

WARNING: If received assembled, re- peat all steps to ensure your unit is properly as- sembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find that parts are missing or damaged, call 1-800-554-6723.

TOOLS REQUIRED

SHex wrench (provided)

INSTALLING BRUSHCUTTER AT- TACHMENT

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

LOOSEN

TIGHTEN Knob

2.Remove the shaft cap from the brushcut- ter attachment (if present).

3.Position locking/release button of attach- ment into guide recess of coupler.

4.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

5.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler

Primary Hole

 

 

Guide Recess

Upper

Locking/

Lower

Release

Shaft

Attachment

 

Button

 

WARNING: Make sure the locking/re- lease button is locked in the primary hole and the knob is securely tightened before operat- ing the unit.

HANDLEBAR ASSEMBLY

DANGER: RISK OF CUT. To avoid se- rious injury, the barrier portion of the handle- bar must be installed as shown on the upper shaft of the powerhead to provide a barrier be- tween operator and the spinning blade. Attach handlebar mounting bracket above arrow on safety warning decal on the upper shaft (pow- erhead end of unit). Ensure handlebar is posi- tioned on mounting bracket at the end of the arrow on the handlebar decal.

NOTE: Two mounting brackets are included with this attachment. Both brackets are provided to adapt this attachment for use with power- heads that have either a 1(2.5 cm) diameter or a 7/8(2.2 cm) diameter upper shaft. The correct bracket must be used to ensure that the handle- bar is mounted securely to the upper shaft be- fore use.

Handlebar Screw

Bracket Cover

Mounting

Bracket

1.Place the mounting bracket over the up- per shaft above the arrow on the safety label. Be sure to use the correct mount- ing bracket for either the 1(2.5 cm) or 7/8(2.2 cm) diameter upper shaft.

2.Position one of the bracket covers under the upper shaft and align the mounting bracket and the bracket cover screw holes. Insert two screws into the screw holes.

4

Image 4
Contents Brushcutter Attachment 11/5/03Identification of Symbols Safety RulesOperator Safety UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAssembly Carton ContentsInstalling Brushcutter AT- Tachment Handlebar AssemblyShoulder Strap Assembly Operation Operating Position Operating Instructions for Brushcutter AttachmentMaintenance Service and AdjustmentsLimited Warranty StorageSeasonal Storage Ject cannot accidentally cause injury

U4000C specifications

The Poulan U4000C is a reliable and robust chainsaw designed to meet the needs of both novice and seasoned users. Known for balancing power and ease of use, the U4000C is an ideal choice for homeowners and professionals alike who require a dependable tool for various cutting tasks.

One of the standout features of the Poulan U4000C is its powerful 40cc two-cycle engine. This engine delivers impressive performance, allowing users to tackle tough cutting jobs without excessive strain. The engine is designed to ensure maximum efficiency while minimizing fuel consumption, making it an environmentally friendly option for chainsaw users.

Another noteworthy aspect of the U4000C is its lightweight design. Weighing in at just under 10 pounds, this chainsaw is easy to handle, reducing user fatigue during prolonged use. Its ergonomic design incorporates a comfortable grip, which enhances control and maneuverability, especially in tricky cutting scenarios. The balanced weight distribution further contributes to its ease of use, providing a more comfortable cutting experience.

The Poulan U4000C is equipped with a 16-inch bar and chain. This length strikes an ideal balance for a variety of projects, ranging from light trimming to more demanding cutting tasks. The chain itself is engineered for sharpness and long-lasting performance, ensuring that users can make precise cuts with minimal effort.

For added convenience, the U4000C features an effortless starting system. The advanced starting technology reduces the amount of pull required to start the engine, making it particularly user-friendly for those who may struggle with traditional chainsaw starting methods. Additionally, the chainsaw includes an automatic oiler, which helps maintain optimal chain lubrication during operation, enhancing the longevity of both the chain and bar.

Safety is a crucial concern for any power tool, and the Poulan U4000C does not disappoint in this regard. It integrates safety features such as a protective handguard and a chain brake that activates in the event of kickback, providing users with peace of mind while operating the saw.

In summary, the Poulan U4000C stands out with its powerful engine, lightweight design, user-friendly features, and critical safety mechanisms. This versatile chainsaw caters to a wide range of cutting applications, making it an excellent choice for anyone looking for a reliable tool that combines performance and safety. Whether you’re preparing firewood, pruning trees, or tackling larger cutting tasks, the U4000C is equipped to get the job done efficiently and effectively.