Poulan 96042010703 Tools Required for Assembly, Toremovetractorfromcarton, Unpack Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)

5/16" wrench

Utility knife

(2)

7/16" wrenches

Tire pressure gauge

(2) 1/2" wrenches

Pliers

(1)

9/16" wrench

 

INSTALL STEERING WHEEL

•Position front wheels of the tractor so they are pointing straight forward.

•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

•Assemble large flat washer, lock washer, bolt and tighten securely.

•Snap steering wheel insert into center of steering wheel.

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TOREMOVETRACTORFROMCARTON

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton .

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

INSERT

 

LARGE FLAT

BOLT

 

WASHER

 

 

LOCK

 

WASHER

 

STEERING

 

WHEEL

BEFORE REMOVING TRACTOR FROM SKID

TO CHECK BATTERY (See Fig. 1)

•Lift seat to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).

•For battery and battery cable installation see "RE- PLACING BATTERY" in the "Service and Adjustments" section in this manual.

LABEL

Fig. 1

ATTACH STEERING WHEEL (See Fig. 2)

ASSEMBLE EXTENSION SHAFT AND BOOT

•Slide extension shaft onto lower steering shaft.

•Place tabs of steering boot over tab slots in dash and push down to secure.

 

STEERING

 

BOOT

LOWER

ADAPTER

 

STEERING

EXTENSION

SHAFT

SHAFT

 

Fig. 2

INSTALL SEAT (See Figs. 3 and 4)

•Remove bolt and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor. Remove the cardboard packing and discard.

SEAT

SWITCH

PAD

SLOT

SEAT

PAN

TAPE

WIRING HARNESS

6

Fig. 3

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PB195H42LT General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Steering WheelToremovetractorfromcarton AssemblyTools Required for Assembly Before Removing Tractor from SkidTo Adjust Seat See Fig Check Tire PressureCheck Deck Levelness Operation Know Your Tractor ROS onPosition To USE Throttle Control D See Fig HOW to USE Your TractorTo SET Parking Brake See Fig Stopping See FigReverse Operation System ROS To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerTowing Carts and Other Attachments Before Starting the EngineTo Operate on Hills Check Engine OIL LevelMowing Tips Purge TransmissionAutomatic Transmission Warm UP General Recommendations MaintenanceMaintenance ScheduleBattery TractorBlade Removal See Fig Engine Muffler CleaningEngine Cooling System See Fig Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment Transaxle Motion Control Lever Neutral Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionTroubleshooting Points Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXLimited Warranty

34-80, 96042010703 specifications

The Poulan 96042010703,34-80 is a versatile and reliable garden tiller designed to meet the needs of both amateur gardeners and seasoned horticulturists. This tiller stands out for its robust construction and user-friendly features, making it an indispensable tool for maintaining soil health and preparing garden beds.

One of the main features of the Poulan tiller is its powerful 34cc engine, which delivers sufficient torque for efficient cultivation. The 34-80 model is equipped with a 2-cycle engine that ensures that the tiller can easily cut through tough soil, making it an ideal choice for various types of gardens, whether they are new or established. The engine's design promotes fuel efficiency, allowing for longer operation between refueling.

The tiller’s steel tines are another highlight, as they are engineered for durability and effectiveness. With a working width of 8 inches, the tines can break down soil efficiently, preparing it for planting. The depth of tilling is adjustable, providing flexibility to the user. This feature makes it suitable for different garden needs, whether you are planting vegetables, flowers, or maintaining a lawn.

The Poulan 96042010703,34-80 utilizes a lightweight construction, giving it an edge in maneuverability. Despite its power, the tiller is easy to handle, making it suitable for users of all experience levels. The adjustable handle allows for comfortable operation, reducing fatigue during prolonged use. The overall compact design facilitates easy storage when not in use.

In terms of technology, this tiller features an automatic choke system that ensures hassle-free startups, even in cold weather. The easy-to-use controls enhance the user experience and ensure that gardeners can quickly engage the tilling process without complications.

Safety features are also integrated into its design, with proper shielding to protect the user from debris and inadvertent accidents. This attention to safety makes the Poulan 96042010703,34-80 a reliable option for family-oriented gardening.

In summary, the Poulan 96042010703,34-80 offers a blend of power, durability, and user-friendly features that cater to gardeners looking to enhance their soil and gardening experience. With its strong engine, robust tines, adjustable features, and safety considerations, this tiller is an excellent investment for anyone serious about gardening.
Top Page Image Contents