Poulan PB22H42YT manual Service and Adjustments, To Remove Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress brake pedal fully and set parking brake.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 17)

•Place attachment clutch in “DISENGAGED” position.

•Lower attachment lift lever to its lowest position.

•Roll belt off engine pulley (M).

•Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket.

•Remove clutch cable spring (Q) from idler arm (R).

•Disconnect front link (E) from mower - remove retainer spring and washer.

•Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

•Go to other side of mower and disconnect the suspen- sion arm and rear lift link.

CAUTION: After rear lift links are dis- connected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever.

M

BF

Q

R

A E

H

PC

D

KL

FIG. 17

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents PB22H42YT Always Wear EYE Protection During OperationGeneral Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents To Remove Tractor from Carton AssemblyUnassembled Parts Unpack CartonCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionStopping HOW to USE Your TractorTo SET Parking BRAKESee Fig To USE Throttle Control D See FigTo Move Forward and Backward See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerReverse Operation System ROS Service REMINDER/HOUR MeterBefore Starting the Engine To Operate on HillsPurge Transmission ADD GasolineTo Start Engine See Fig Automatic Transmission Warm UPMowing Tips General Recommendations MaintenanceMaintenance ScheduleBrake Operation BatteryTractor TiresEngine Muffler CleaningEngine OIL Filter Spark PlugsService and Adjustments To Remove Mower See FigTo Install Mower See Figs To Level Mower To Replace Mower Drive Belt See Fig To Check BrakeTo Replace Motion Drive Belt See Fig To Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Attach Jumper CablesTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Engine dies when Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXPage Parts and Service

PB22H42YT specifications

The Poulan PB22H42YT is a highly efficient riding mower designed for homeowners who prioritize both performance and comfort. This machine offers a perfect blend of advanced features and robust technology, making it an excellent choice for maintaining medium to large lawns.

One of the standout features of the PB22H42YT is its powerful 22 HP Briggs & Stratton engine. This engine delivers reliable performance, ensuring that the mower can handle various mowing conditions with ease. The overhead valve technology in the engine not only enhances fuel efficiency but also reduces emissions, making it an eco-friendly option for lawn care.

The Poulan PB22H42YT comes equipped with a 42-inch cutting deck, which is perfect for efficiently cutting grass in larger areas. The deck is designed for superior maneuverability, allowing the operator to navigate around trees and flower beds without hassle. Furthermore, the deck height can be easily adjusted to achieve the desired cutting height, ranging from 1.5 to 4 inches.

Another notable characteristic of the PB22H42YT is its hydrostatic transmission. This feature provides a smooth and responsive driving experience, allowing the operator to easily change speed and direction without the need for gear shifting. This is particularly beneficial on uneven terrain or when working around obstacles.

Comfort is also a key aspect of the Poulan PB22H42YT design. The mower is equipped with a comfortable, padded seat that offers ample support during long mowing sessions. The easy-to-reach control panel and ergonomic steering wheel further enhance the user experience, making it a joy to operate.

In terms of maintenance, the Poulan PB22H42YT is designed for convenience. Its easy-access engine and removable cutting deck make tasks like oil changes, blade sharpening, and cleaning a breeze, ensuring that the mower remains in peak condition.

The PB22H42YT also offers an impressive turning radius, allowing for agile navigation in tight spaces. Coupled with its durable construction, the mower promises longevity and reliability over many seasons of lawn care.

In summary, the Poulan PB22H42YT is a feature-rich riding mower that combines power, efficiency, and comfort. With its impressive engine, hydrostatic transmission, and user-friendly design, it stands out as an excellent choice for those looking to maintain their lawns effectively and effortlessly.
Top Page Image Contents