Poulan PO1742STA manual Before Starting the Engine

Page 12

OPERATION

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER

HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 6

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

•To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model NO. PO1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Clean AIR Screen EngineBelts Transaxle CoolingCleaning Engine Cooling Fins See FigMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO1742STA, Product Number 954 56Electrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Shaft Asm Cross Tapered PMST/20 Steering Assembly Nut Hex Jam Toplock 1/2-20 Unf Engine Optional Equipment Spark ArresterEngine 170551 Control Throt /Ch FlagSeat Assembly Decals Wheels & TiresMower Lift 159460 Mower Deck Repair Parts Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

PO1742STA specifications

The Poulan PO1742STA is a robust and efficient lawn tractor designed to tackle various gardening tasks with ease. This versatile machine brings together power, performance, and user-friendly features, making it a popular choice among homeowners and landscaping professionals alike.

One of the main highlights of the Poulan PO1742STA is its powerful engine. Equipped with a reliable 17.5 HP Briggs & Stratton engine, this lawn tractor delivers smooth performance and ample power to handle various mowing tasks. The engine is designed for efficiency and durability, ensuring that it can withstand the rigors of regular use while providing consistent performance.

The cutting deck is another standout feature of the Poulan PO1742STA. With a 42-inch wide cutting deck, it helps reduce mowing time by covering more ground in fewer passes. The deck is constructed from high-quality materials to ensure longevity and includes a reinforced chassis for stability. Additionally, the cutting height can be easily adjusted, allowing users to customize the length of the grass according to their preferences or seasonal needs.

One of the key technologies that enhance the functionality of the PO1742STA is its easy maneuverability. The lawn tractor features a tight turning radius, allowing users to navigate around trees, flower beds, and other obstacles with precision. Coupled with its responsive steering, this makes the tractor easy to operate and ideal for smaller yards with numerous landscaping features.

Comfort and convenience are also prioritized in the design of the Poulan PO1742STA. The tractor comes with an adjustable seat that provides ample cushioning, ensuring a comfortable ride even during extended mowing sessions. Additionally, the dashboard is ergonomically designed for ease of use, featuring intuitive controls for starting the engine, engaging the blades, and adjusting the cutting height.

An added advantage of the Poulan PO1742STA is its ease of maintenance. The machine is designed for quick access to the engine and other vital components, making routine checks and servicing hassle-free. This ensures that users can keep their tractor in optimal working condition without spending too much time on upkeep.

In summary, the Poulan PO1742STA is an exceptional lawn tractor that combines power, efficiency, and user-friendly features. Its robust engine, ample cutting width, maneuverability, and comfort-focused design make it an excellent choice for anyone looking to maintain a beautiful lawn with minimal effort. Whether for residential or light commercial use, the PO1742STA stands out as a reliable gardening tool.
Top Page Image Contents