Jensen Tools MSR2007 Installation, Before You Begin, Important Notes, Wired Commander Mounting

Page 4

MSR2007

INSTALLATION

Before You Begin

Before you begin, always disconnect the battery negative terminal.

Important Notes

•Before final installation, test the wiring connections to make sure the unit is connected properly and the system works.

•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

•Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vessel.

•Install the unit where it does not interfere with driving and cannot injure passengers if there is a sudden or emergency stop.

•Avoid installing the unit where it will be subject to high temperatures from direct sunlight, hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration.

Wired Commander Mounting

1.Choose a mounting area for the wired commander that is clean and flat, allowing the rear gasket to fully seal to the mounting surface.

2.Secure the wired commander using either of the recommended mounting methods detailed in the diagrams below.

7/8” HOLE REQUIRED FOR CABLE

M4 MOUNTING SCREWS (4-PCS)

MINIMUM SCREW LENGTH 1 1/2”

M5X8 SCREWS REQUIRED FOR MOUNTING

MAXIMUM SCREW DEPTH IN COMMANDER 1/4”

7/8” HOLE REQUIRED FOR CABLE

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents MSR2007 Contenido ContentsTable DES Matières Safety Information When BoatingProtect from High Temperatures Use the Proper Power SupplyInstallation Wired Commander MountingBefore You Begin Important NotesReconnect Battery Tuner/Amplifier MountingWiring Basic Operation LOW Battery Operation System MenuScroll Quick Exit Hot KeyTuner Operation Sirius Radio Operation Accessing iPod Mode Search ModeIpod Operation Turning the iPod On/OffCare and Maintenance Troubleshooting SpecificationsIgnition InterferenceInformación DE Seguridad Cuando NavegueProtéjalo del Agua Protéjalo contra las Altas TemperaturasInstalación Antes de EmpezarNotas Importantes Montaje del Comando CableadoMontaje de Radio/Amplificador Reconecte la BateríaCableado Cable DE ExtensiónOperación Básica Operación con Batería Baja LOW Battery Menú de SistemaScroll Avanzar Tecla de Salida RápidaOperación DEL Sintonizador Operación DE Radio Sirius Operación DEL Ipod Cuidado Y Mantenimiento Solución DE Problemas EspecificacionesIgnición InterferenciaInformations SUR LA Securite Lorsque vous êtes en bateauProtéger de leau Protéger des températures hautesMontage du commandant cable Avant de commencerMontage de tuner/amplificateur Rebrancher la pileCâblage Cable DextensionOperation DE Base Menu système Laffichage aux cristaux liquides LCDDéroulement Touche rapide pour sortie rapideOperation Tuner Operation Radio Sirius Operation Ipod Soin ET Entretien Dépannage AllumageInterférence GénéralitésMSR2007 ASA Electronics Corporation 030907

MSR2007 specifications

The Jensen Tools MSR2007 is an advanced tool designed to meet the rigorous demands of professionals in various fields, including telecommunications, networking, and electrical work. This multifunctional tool is a must-have for anyone looking for efficiency, precision, and reliability in their instrumentation.

One of the standout features of the MSR2007 is its multifunctionality. It combines multiple tools into one compact design, allowing users to save space in their toolkits while ensuring they have all the necessary instruments at hand. The MSR2007 integrates a variety of testing capabilities, including cable testing, continuity, and tone generation, making it an ideal choice for telecommunications technicians and network installers.

The device is equipped with a large LCD display that provides clear readings and easy navigation through its various functions. This ensures that professionals can efficiently use the tool without any guesswork. Additionally, the backlit screen enhances visibility in low-light conditions, making it suitable for work in attics, basements, or outdoor environments.

Another significant characteristic of the Jensen Tools MSR2007 is its user-friendly interface. The buttons are intuitive and designed for quick access to frequently used features. This reduces downtime during projects, allowing users to focus on their tasks rather than troubleshooting their tools.

Technology is at the forefront of the MSR2007. It includes advanced sensing technology that enhances accuracy and reliability in testing, ensuring that users receive the most accurate data possible. The device supports various cable types, including twisted pair and coaxial cables, making it versatile for different applications.

Durability is another key aspect of the Jensen Tools MSR2007. Constructed with high-quality materials, the tool is built to withstand the rigors of professional use. It is lightweight yet robust, ensuring it can handle the wear and tear typically experienced on job sites. Additionally, the MSR2007 comes with a protective case that safeguards the instrument when not in use, providing an extra layer of protection.

In summary, the Jensen Tools MSR2007 stands out as a top-performing, multifunctional tool that caters to the needs of professionals in various industries. With its advanced testing capabilities, clear display, user-friendly interface, advanced sensing technology, and durable construction, the MSR2007 ensures that users can execute their tasks efficiently and accurately, making it an invaluable asset in any toolkit.
Top Page Image Contents