SERVICE AND ADJUSTMENTS
A
B
FIG. 18
•Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring (K).
•Install belt on engine pulley (M), in belt keepers (G).
E
•Insert end of link (E) into hole in front mower bracket and secure with washer and retainer spring (J).
•Hook end of clutch cable spring (Q) into hole in idler arm (R).
F
J
H
C
D
FIG. 20
IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.
•Raise attachment lift lever to highest position.
•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.
G MF
FIG.19
Q R
G
P
A E
B
C
K | D |
|
L | FIG. 21 | |
|
|
19