PS1220M Installation, Supplies and Tools Needed

PS1220M

Installation

This device is a high-power audio amplifier intended for installation in vehicles with a 12-Volt negative ground electrical system. Attempting to connect or operate the amplifier in another type of electrical system may cause damage to the amplifier or the electrical system.

Supplies and Tools Needed

To install the amplifiers, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you start.

Supplies

•Black electrical tape

•Amplifier Installation Kit

Tools

•Cordless drill with assortment of bits

•Flat-head and Phillips screwdrivers

•Wire cutters/strippers

•Crimping tool

•12-volt test light or digital multimeter

•Wire brush, sandpaper or scraping tool (ground connection to vehicle should be a clean, unpainted metal surface)

Disconnect Battery

Disconnect the negative (-) battery cable before mounting the amplifier or making any connections. Check the battery and alternator ground (-) connections, making sure they are properly connected and free of corrosion.

Location and Mounting

The PS amplifier’s compact design allows great flexibility in mounting. Common mounting locations include under the front passenger seat or in the trunk area.

When selecting a location, remember that amplifiers generate heat. Select a location on a flat surface away from heat and moisture where air can circulate around the amplifier. Do not cover the amplifier with carpets or enclose it behind interior trim panels, and do not mount the amplifier in an inverted or upside down configuration. Be sure the mounting location and the drilling of pilot holes will not damage any wires, control cables, fuel lines, fuel tanks, hydraulic lines or other vehicle systems or components.

Place the amplifier in the mounting location, and mark the positions of the holes with a marker, pen or pencil. Carefully drill the mounting holes in the marked positions, and use the supplied mounting screws to securely fasten the amplifier to the mounting surface.

Routing Wires

Proper wiring connections are illustrated in the Routing Wires diagram. If wiring connections are made incorrectly, the unit will not operate properly and could become permanently damaged. Follow the installation instructions carefully, or have the installation completed by an experienced technician.

Routing Wires

Circuito de Ubicación de los Cables

Cablage

PS1220M, PS1220M specifications

The Jensen Tools PS1220M is a power supply that stands out in the electronics and engineering field for its robustness, versatility, and advanced technology. It is designed for a wide range of applications, making it essential for technicians, engineers, and hobbyists who require a reliable power source for their projects.

One of the main features of the PS1220M is its dual-output capability, providing a stable 12V and 20V output simultaneously. This allows users to power multiple devices at the same time without the need for additional power supplies, enhancing efficiency and convenience. Its adjustable voltage range from 0 to 30V further adds to its versatility, making it compatible with a variety of electronic components and systems.

The power supply is equipped with an intelligent overcurrent protection feature that safeguards both the power supply and connected devices from damage. This technology prevents overheating and ensures durability, making the PS1220M a reliable choice for long-term use. Moreover, the built-in short circuit protection and overload protection mechanisms bolster its safety profile, providing peace of mind for users.

Ease of use is another highlight of the Jensen Tools PS1220M. Its user-friendly interface includes a clear digital display that shows voltage and current readings in real-time. This allows for precise adjustments and monitoring, ensuring that users can achieve the desired performance from their devices. The power supply also incorporates intuitive control knobs and buttons for quick adjustments, making it suitable for both beginners and experienced users.

Portability is also a characteristic feature of the PS1220M. Its compact design and lightweight construction ensure that it can be easily transported between work sites or stored away when not in use. Additionally, the rugged casing is designed to withstand the rigors of daily use in various environments, emphasizing its practicality.

In summary, the Jensen Tools PS1220M is a high-quality power supply that combines performance, safety, and user-friendly features. Its dual-output capability, adjustable voltage, and advanced protective technologies make it an invaluable tool for electronic applications. With its portability and durability, the PS1220M proves to be a smart investment for anyone seeking a reliable power source for their projects.