Poulan 433401 manual Safety Rules, Safe Operation Practices for Ride-On Mowers, General Operation

Page 2

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

WARNING: In order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug.

WARNING: Donotcoastdownahillinneu- tral, you may lose control of the tractor.

WARNING: Tow only the attachments that are recommended by and comply with specificationsofthemanufacturerofyour tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

WARNING

Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

WARNING

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

I. GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the manual before starting.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge chute, or other safety devices in place and working.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge chute.

Operate machine only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck.

Always wear eye protection when operating machine.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower- related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

Follow the manufacturer's recommendation for wheel weights or counterweights.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

Mow up and down slopes, not across.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Choose a low ground speed so that you will not have to stop or shift while on the slope.

Do not mow on wet grass. Tires may lose traction. Always keep the machine in gear when going down slopes. Do not shift to neutral and coast downhill.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes.

Do not try to stabilize the machine by putting your foot on the ground.

Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

2

Image 2
Contents Model General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Steering WheelTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidCheck Deck Levelness Install Seat See FigCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other Attachments Before Starting the EngineTo Operate on Hills To TransportTo Start Engine See Fig Mowing TipsADD Gasoline Maintenance Lubrication ChartBlade Care BatteryTractor Blade Removal See FigEngine Muffler CleaningEngine Cooling System See Fig Spark PlugsTo Level Mower Housing Service and AdjustmentsTo Install Mower See Fig To Remove Mower See FigTo Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Carburetor Interlocks and RelaysFuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionExcessive Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXService Notes Limited Warranty

433401 specifications

The Poulan 433401 is a remarkable chainsaw that embodies a blend of power, efficiency, and user-friendly design. Ideal for both professionals and DIY enthusiasts, this model is thoughtfully engineered to handle a variety of cutting tasks, from felling trees to pruning shrubs.

One of the most notable features of the Poulan 433401 is its powerful engine. Equipped with a 33cc two-stroke engine, it delivers ample power while maintaining a lightweight build, which is critical for maneuverability during extended usage. The engine's design allows for efficient fuel consumption, enabling users to maximize their cutting time without frequent refueling. This is particularly useful for those who take on larger jobs or require extended operational periods.

The chainsaw boasts a 16-inch guide bar, making it suitable for a range of cutting applications. The length strikes a balance between efficient cutting and ease of control, making it perfect for both seasoned users and those new to chainsaw operation. The Oregon chain enhances cutting performance, providing smooth and reliable operation while ensuring a clean cut.

One of the standout technologies incorporated into the Poulan 433401 is its automatic oiling system. This essential feature ensures that the chain remains adequately lubricated during operation, reducing friction and wear. The automatic system not only enhances the lifespan of the chain and bar but also ensures optimal performance, allowing users to focus on the task at hand rather than constant maintenance.

Safety features are paramount in the design of the Poulan 433401. It includes a chain brake designed to stop the chain in an event of kickback, which is a common risk when using chainsaws. Additionally, the front and rear handles are ergonomically designed, providing a comfortable grip and reducing user fatigue. This attention to ergonomics helps improve precision and control, particularly during prolonged use.

The Poulan 433401 is also relatively easy to start, thanks to its spring-assisted starter mechanism and purge bulb feature. This makes it accessible to users of all skill levels, eliminating the frustrations often associated with starting smaller engine chainsaws.

Overall, the Poulan 433401 combines power, versatility, and safety. Its innovative design and user-centric features make it a reliable tool for various cutting tasks, setting it apart as a favorable choice in the chainsaw market. Whether for forestry professionals or homeowners looking to maintain their landscapes, the Poulan 433401 stands out as a valuable asset.