Operation, Surround Modes | Infinity TOTAL SPEAKER SOLUTIONS

OPERATION

Surround Modes

When using the TSS-750 in a Dolby Pro Logic* home theater system, make sure the receiver’s center channel mode is set to “Normal.” When using the system in a Dolby Digital or DTS home theater system, make sure all speakers are set to “Small”.

Some Dolby Digital-equipped receivers/processors offer different setup options for each source or surround mode, e.g., CD-stereo, videotape, Dolby, Pro Logic. In each case, follow your equipment’s instructions to ensure that the subwoofer output is turned on and that the speakers are set to “Small” in each mode.

Power On

Plug your subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver.

Initially set the Subwoofer Level Control	to the“MIN” position.
Turn on the subwoofer by pressing the Power Switch		on the
rear panel.

Turn on your entire audio system and start a CD or movie sound-track at a moderate level.

Auto On/Stand-By

With the Power Switch in the ON position, the LED on the front panel will remain lit in red or green to indicate the On/Stand-By mode of the subwoofer.

RED = STAND-BY (No signal detected, Amp Off)

GREEN = ON (Signal detected, Amp On)

The subwoofer will automatically enter the Stand-By mode after approximately 10 minutes when no signal is detected from your system. The subwoofer will then power ON instantly when a signal is detected. During periods of normal use, the Power Switch

can be left on. You may turn off the Power Switch	for extended
periods of nonoperation, e.g., when you are away on vacation.

Adjust Level

Turn the Subwoofer Level Control	up about half way. If no sound
emanates from the subwoofer, check the AC-line cord and input

cables. Are the connectors on the cables making proper contact? Is the AC plug connected to a “live” receptacle? Has the Power Switch been pressed to the “On” position? Once you have confirmed

that the subwoofer is active, proceed by playing a CD or DVD. Use a selection that has ample bass information.

Set the overall volume control of the receiver/processor to a comfortable level. Adjust the Subwoofer Level Control until you obtain a pleasing blend of bass. Bass response should not overpower the room but rather be adjusted so there is a harmonious blend across the entire musical range. Many users have a tendency to set the subwoofer volume too loud, adhering to the belief that a subwoofer is there to produce lots of bass. This is not entirely true. A subwoofer is there to enhance bass, extending the response of the entire system so the bass can be felt as well as heard. However, overall balance must be maintained or the music will not sound natural. An experienced listener will set the volume of the sub- woofer so its impact on bass response is always there but never obtrusive.

Crossover Adjustment

The Crossover Frequency Control determines the highest frequency at which the subwoofer reproduces sounds. For the TSS-750, it is recommended that this control be set at 120Hz (approximately the 3 o’clock position).

NOTE: This control will have no effect if the LFE/Normal Switch

is set to LFE. If you have a Dolby Digital or DTS receiver/ processor, the Low-Pass Frequency is set by the receiver/ processor. Set the LFE/Normal Switch on the subwoofer to LFE. Consult your owner’s manual to learn how to view or change this setting.

A setting of 120Hz – 150Hz is recommended.

Phase Control

The Phase Switch determines whether the subwoofer speaker’s piston-like action moves in and out with the main speakers, 0˚, or opposite the main speakers, 180˚. Proper phase adjustment depends on several variables such as room size, subwoofer placement and listener position. Adjust the phase switch to maximize bass output at the listening position.

Final Positioning

After correctly connecting the TSS-750 system and verifying that both the subwoofer and all satellite speakers are playing, it is time to optimize the system for your particular listening room. Earlier, you placed the subwoofer in its general location. Finding the exact location for optimum performance sometimes only involves moving the speakers up to a few centimeters in any direction. We urge you, therefore, to experiment with placement, if possible, until your speakers deliver their full potential.

MAINTENANCE AND SERVICE

The satellite and subwoofer enclosures may be cleaned using a soft cloth to remove fingerprints or to wipe off dust.

All wiring connections should be inspected and cleaned or remade periodically. The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions, and other factors, but once per year is the minimum.

In the event that your TSS-750 ever needs service, contact your local Infinity dealer or distributor.

TSS-750 6

TOTAL SPEAKER SOLUTIONS, TSS-750 specifications

Infinity TOTAL SPEAKER SOLUTIONS (TSS-1200) is a revolutionary sound system designed for both professional audio applications and home entertainment. With its cutting-edge technology and innovative features, the TSS-1200 delivers an exceptional audio experience that is sure to impress audiophiles and casual listeners alike.

One of the standout features of the TSS-1200 is its advanced speaker configuration. This system employs a two-way design, incorporating a robust 12-inch woofer and a high-frequency driver that ensures a well-balanced sound across all frequencies. The 12-inch woofer is designed to produce deep, powerful bass while maintaining clarity in the mid-range frequencies, making it ideal for music genres that demand both richness and precision.

The TSS-1200 also includes enhanced connectivity options. It features Bluetooth capabilities, allowing users to stream their favorite songs directly from smartphones or tablets. Additionally, the system offers HDMI ARC, optical, and auxiliary inputs, providing versatility and compatibility with a wide range of devices. This means that whether you’re using it for a home theater setup or to host a party, the TSS-1200 has you covered.

Another key characteristic of the TSS-1200 is its built-in amplification. The system incorporates a powerful amplifier that provides sufficient power to drive the speakers effectively, resulting in minimal distortion and a wider soundstage. This ensures that even at high volumes, the audio remains clean and dynamic, making it perfect for both small gatherings and larger events.

For those who value customization, the TSS-1200 features adjustable EQ settings. Users can tailor the sound profile to their liking, enhancing specific frequencies to suit different audio preferences or environments. This personalization allows for a more immersive listening experience, whether you’re watching movies, playing video games, or enjoying music.

Moreover, the TSS-1200 is designed with durability in mind. Its rugged construction ensures longevity, making it suitable for both indoor and outdoor usage. This level of robustness is essential for professional applications, where equipment is often subjected to rigorous conditions.

In conclusion, the Infinity TOTAL SPEAKER SOLUTIONS TSS-1200 stands out as a versatile, high-performance audio solution. Its exceptional features, from advanced speaker design to comprehensive connectivity options, make it an ideal choice for anyone seeking a reliable and immersive sound experience. Whether for personal use or professional settings, the TSS-1200 promises to elevate audio enjoyment to new heights.