TROUBLESHOOTING CHART
PROBLEM | CAUSE | CORRECTION | ||
|
|
|
|
|
Loss of power | 3. | 3. | Clean underside of mower | |
(continued) |
| trash under mower. |
| housing. |
| 4. | Dirty air filter. | 4. | Clean/replace air filter. |
| 5. | Low oil level/dirty oil. | 5. | Check oil level/change oil. |
| 6. | Faulty spark plug. | 6. | Clean and regap or change |
|
|
|
| spark plug. |
| 7. | Dirty fuel filter. | 7. | Replace fuel filter. |
| 8. | Stale or dirty fuel. | 8. | Empty fuel tank and refill tank |
|
|
|
| with fresh, clean gasoline. |
| 9. | Water in fuel. | 9. | Empty fuel tank and carbure- |
|
|
|
| tor, refill tank with fresh gas- |
|
|
|
| oline and replace fuel filter. |
| 10. Spark plug wire loose. | 10. Connect and tighten spark | ||
|
|
|
| plug wire. |
| 11. Dirty engine air screen/fins. | 11. Clean engine air screen/fins. | ||
| 12. Dirty/clogged muffler. | 12. Clean/replace muffler. | ||
| 13. Loose or damaged wiring. | 13. Check all wiring. | ||
| 14. Carburetor out of adjustment. | 14. See “To Adjust Carburetor” in | ||
|
|
|
| Service and Adjustments |
|
|
|
| section. |
| 15. Engine valves out of | 15. Contact a qualified service | ||
|
| adjustment. |
| center/department. |
|
|
|
|
|
Excessive | 1. | Worn, bent or loose blade. | 1. | Replace blade. Tighten blade |
vibration |
|
|
| bolt. |
| 2. | Bent blade mandrel. | 2. | Contact a qualified service |
|
|
|
| center/department. |
| 3. | Loose/damaged part(s). | 3. | Tighten loose part(s). |
|
|
|
| Replace damaged parts. |
|
|
|
|
|
Engine continues | 1. | Faulty | 1. | Check wiring, switches and |
to run when oper- |
| presence control system. |
| connections. If not contact a |
ator leaves seat |
|
|
| qualified service center/de- |
with attachment |
|
|
| partment. |
clutch engaged |
|
|
|
|
|
|
|
|
|
Poor cut - uneven | 1. | Worn, bent or loose blade. | 1. | Replace blade. Tighten |
|
|
|
| blade bolt. |
| 2. | Mower deck not level. | 2. | Level mower deck. |
| 3. | Buildup of grass, leaves, and | 3. | Clean underside of mower |
|
| trash under mower. |
| housing. |
| 4. | Bent blade mandrel. | 4. | Contact a qualified service |
|
|
|
| center/department. |
| 5. | Clogged mower deck vent | 5. | Clean around mandrels to |
|
| holes from buildup of grass, |
| open vent holes. |
|
| leaves, and trash around |
|
|
|
| mandrels. |
|
|
|
|
|
|
|
Mower blades will | 1. | Obstruction in clutch | 1. | Remove obstruction. |
not rotate |
| mechanism. |
|
|
| 2. | Worn/damaged mower drive | 2. | Replace mower drive belt. |
|
| belt. |
|
|
| 3. | Frozen idler pulley. | 3. | Replace idler pulley. |
| 4. | Frozen blade mandrel. | 4. | Contact a qualified service |
|
|
|
| center/department. |
27