Poulan 188774 To Convert to Bagging or Discharging, Check Tire Pressure, Check Deck Levelness

Page 8

ASSEMBLY

RETAINER

SPRING

PIN

SHOULDER

BOLT

ADJUSTING

BAR

GAUGE

 

 

WHEEL

3/8 WASHER

3/8-16 CENTER

 

LOCKNUT

 

 

FIG. 4

INSTALL MULCHER PLATE (See Fig. 5) (If previously removed)

•Raise and hold deflector shield in upright position.

•Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

•Hook front latch into hole on front of mower deck.

•Hook rear latch into hole on back of mower deck.

CAUTION: Do not remove deflector shield from mower.

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulcher blades are designed for discharging and bagging also.

DEFLECTOR

SHIELD

MULCHER

PLATE

LATCH

HOOKS

FIG. 5

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFOREYOU OPERATE AND ENJOYYOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROMTHIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in drive position.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls - their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓It is important to purge the transmission before oper- ating your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO

START ENGINE” and “PURGE TRANSMISSION” in

8the Operation section of this manual).

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PD185H42STA Always Wear EYE Protection During OperationIV. Service Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidCheck Battery See Fig Assemble Gauge Wheels to Mower Deck See FigTo Convert to Bagging or Discharging Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport See Figs To Operate Mower See FigTo Operate on Hills Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Mulching Mowing TipsMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Level Mower Housing To Remove Mower See FigBelt Removal Belt InstallationTo Replace Mower Blade Drive Belt See Fig Transaxle Motion Control Lever Neutral Adjustment See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel ALIGN- MentReplacing Battery See Figs Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points When operator leaves seat Schematic Tractor - Model Number PD185H42ST PD185H42STAElectrical KEY Part Description Chassis KEY Drive Transaxle Hydro Gear Steering Assembly KEY Part NO. NO. Description Seat Assembly Decals Wheels and TiresEngine Optional EquipmentMower Lift Mower Deck 152182032X421 Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

188774 specifications

The Poulan 188774 is a versatile and powerful tool designed for those who seek efficiency and performance in their outdoor tasks. This chainsaw is particularly well-suited for homeowners and light commercial users who need a reliable solution for cutting firewood, trimming trees, or clearing brush.

One of the standout features of the Poulan 188774 is its robust engine. Powered by a 2-cycle gas engine, this chainsaw delivers impressive power while maintaining a lightweight frame, making it easy to maneuver during operations. The engine is designed to provide high torque and a rapid chain speed, ensuring that cuts are swift and clean. With a displacement of 50cc, users can expect optimal performance regardless of the task at hand.

In terms of technology, the Poulan 188774 incorporates advanced features such as an automatic chain oiler, which helps to keep the chain lubricated during operation. This not only prolongs the life of the chain but also ensures that the chainsaw operates smoothly, reducing the risk of overheating. Additionally, the tool has an easy-access air filter that simplifies maintenance, allowing users to keep the engine running smoothly with minimal effort.

The chainsaw also features a comfortable and ergonomic handle, which reduces fatigue during extended use. This is particularly beneficial for users who may face long hours of cutting or trimming. The anti-vibration system is another notable technology that enhances user experience, minimizing the vibrations felt in the hands and arms, thereby improving control and precision.

Safety is a priority with the Poulan 188774, which includes essential safety features such as a chain brake that instantly stops the chain in the event of kickback. The easy-to-use start system is designed to enable a hassle-free ignition, allowing users to get to work without delays.

In conclusion, the Poulan 188774 stands out for its combination of power, efficiency, and user-friendly features. With its durable construction and advanced technologies, this chainsaw is a reliable choice for anyone looking to tackle their outdoor cutting needs effectively and safely. Whether you're a weekend warrior or a seasonal user, the Poulan 188774 provides the performance you need to get the job done.
Top Page Image Contents