Attaching the stand to the speaker

2.Feed your speaker cable through the stand column. The cable can exit through the hole at the bottom rear of the stand column or it can exit through the hole in the stand base.

3.Secure the stand base to the column and tighten the two fixing screws. Use the hex key provided.

1.Remove the two screws and take off the rear cover plate from the speaker. Use the hex key supplied to loosen the screws. Note the blanking plug which fills the unused pivot hole on the rear of the speaker.

2.Connect the cable to the speaker terminals. Observe correct polarity. Speaker cable is usually colour-coded (red or white for positive) or provided with an identifying stripe or rib on the positive conductor. Connect the positive conductor to the red speaker terminal.

3.Attach the speaker to the stand and tighten the two fixing screws. Use the hex key supplied.

4.Fit the blanking plug into the unused foot pivot location hole and then re-fit the rear cover on the speaker and tighten the fixing screws.

5. Your speaker should now look like this.

INSTALLING THE OREUS SUBWOOFER

The rear panel metal plate acts as a heatsink for the subwoofer’s internal amplifier. There should be at least 10 cm of free space around the heatsink for air circulation. Do not place pillows or other objects against it.

We recommend placing the subwoofer at least 2 to 3 feet away from a television or a computer’s disc-drive system to prevent smearing the colors of the TV picture or erasing of the magnetic drive.

Placement will depend upon your room and the amount and quality of bass required (for example, whether or not your room permits placement of the subwoofer near one of the front satellites).

Careful experimentation will enable you to determine the best position for the subwoofer. See suggestions on next page.

CAUTION:

The subwoofer's rubber feet can under certain conditions smudge or discolor light colored and delicate surfaces. Please place a protective mat or coaster under the rubber feet to prevent marking or discoloration.

SUBWOOFER PLACEMENT

This view shows the subwoofer positioned behind the right channel satellite speaker to re-create the actual location of bass instruments in an orchestra.

Here are some useful hints:

-If the bass response seems inadequate, move the subwoofer closer to a wall or corner.

-If the bass is too heavy, try moving the subwoofer futher from the wall. It will take time and patience to find the most pleasing acoustic location for your subwoofer. Testing for sonic balance and blending should always be made for your normal listening position, using a wide range of source material. As a startingpoint, initially place the subwoofer behind your right channel satellite speaker, about 3 or 4 inches from the wall. We suggest trying this location first because in an orchestra, the bass instruments are usually located in the back and to the right.

Oreus HCS specifications

Infinity Oreus HCS is a groundbreaking advancement in the realm of high-capacity storage solutions, designed to meet the increasing demands for data storage in both enterprise and cloud environments. This cutting-edge technology provides remarkable performance and reliability, making it an ideal choice for organizations seeking to enhance their data management capabilities.

One of the main features of Infinity Oreus HCS is its exceptional scalability. The system supports a modular architecture that allows organizations to easily expand capacity as their data needs grow. This flexibility is crucial in today’s rapidly evolving digital landscape, where the volume of data generated by businesses continues to skyrocket. Users can start with a configuration that meets their current needs and expand without the need for a complete system overhaul.

Another key characteristic of the Infinity Oreus HCS is its advanced data protection and integrity mechanisms. The system incorporates sophisticated error correction algorithms and data redundancy techniques to ensure that stored information remains secure and accessible even in the event of hardware failures. This is particularly important for businesses that rely heavily on data for their operations and decision-making processes.

In terms of performance, Infinity Oreus HCS utilizes cutting-edge solid-state drive (SSD) technology combined with high-speed interconnects that significantly enhance data transfer rates. This results in minimal latency and faster access times, which is vital for applications requiring real-time data processing. Moreover, the system is designed to support a wide range of data workloads, from standard file storage to complex database applications, making it versatile across various use cases.

The integration of artificial intelligence (AI) and machine learning (ML) capabilities is another distinguishing feature of Infinity Oreus HCS. These technologies enable predictive analytics for data management, assisting administrators in optimizing storage allocation and performance based on usage patterns. This intelligent approach not only streamlines operations but also maximizes resource efficiency.

Overall, Infinity Oreus HCS emerges as a comprehensive high-capacity storage solution that combines scalability, reliability, and performance, setting a new standard in data management. Its innovative technologies and features make it an essential asset for organizations navigating the complexities of the digital age, ensuring they can efficiently store, protect, and manage their critical data. The future of storage is here with Infinity Oreus HCS, empowering businesses to thrive in an information-driven world.