Poulan 187594 manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse

Page 23

SERVICE AND ADJUSTMENTS

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 28)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

 

HEADLIGHT

HOOD

WIRE

CONNECTOR

FIG. 28

ENGINE

TO ADJUST THROTTLE CONTROL CABLE (See Fig. 29)

The throttle control has been preset at the factory and adjustment should not be necessary. Check adjustment as described below before loosening cable. If adjustment is necessary, proceed as follows:

•With engine not running, move throttle control lever from slow to choke position. Slowly move lever from choke to fast position.

•Check that holes “A” in governor control lever and hole in governor plate line-up. If holes “A” are not aligned, loosen clamp screw and move throttle cable until holes are aligned. Tighten clamp screw securely.

 

GOVERNOR

GOVERNOR

 

CONTROL LEVER

 

CONTROL PLATE

 

 

HOLES “A”

CLAMP

THROTTLE

 

SCREW

CABLE

 

 

FIG. 29

TO ADJUST CARBURETOR

The carburetor has been preset at the factory and adjustment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. If the carburetor does need adjustment, see engine manual.

High speed stop is factory adjusted. Do not adjust - dam- age may result.

IMPORTANT:NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACTYOUR NEAREST AUTHORIZED SERVICE CENTER/ DEPARTMENT, WHICH HAS PROPER EQUIPMENT AND EXPERIENCE TO MAKE ANY NECESSARY ADJUSTMENTS.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Model NO. PC1742STB Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other ATTACH- Ments Before Starting the EngineTo Operate on Hills To TransportTo Start Engine See Fig Mowing TipsADD Gasoline Before Each USE MaintenanceLubrication Chart General RecommendationsTractor Engine Spark Plugs CleaningEngine Cooling Fins See Fig MufflerTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigTo Remove Wheel for Repairs See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Remove CABLES, Reverse Order To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Attach Jumper CablesTo Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PC1742STB SchematicElectrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Bolt RdHd 3/8-16 unc x 1-3/4 Gr.5 Steering Assembly 160367 Spacer Brace Axle 72140618 Optional Equipment EngineSeat Assembly Wheels & Tires DecalsMower Lift Mower Deck CAB Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation

187594 specifications

The Poulan 187594 is a powerful and efficient lawn mower designed for both residential and commercial use. This model is well-regarded for its robust construction and user-friendly features, making it a popular choice among homeowners and landscaping professionals alike.

One of the standout features of the Poulan 187594 is its powerful engine. Equipped with a reliable 140cc engine, this mower delivers exceptional performance, ensuring that grass cutting is both fast and efficient. The engine is designed for easy starting, reducing the inconvenience often associated with traditional gas mowers.

The cutting deck of the Poulan 187594 measures 21 inches, allowing users to cover more ground in a shorter amount of time. This size is ideal for maneuvering around tight spots while still being large enough to handle open areas effectively. The mower features a three-in-one cutting system, which allows users to choose between side discharge, mulching, and bagging options. This versatility makes it suitable for tackling various lawn conditions and personal preferences.

For comfort and ease of use, the Poulan 187594 comes with an adjustable height feature, allowing users to select from six different cutting heights, ranging from 1.25 inches to 3.75 inches. This adaptability enables the mower to provide a clean cut regardless of the type of grass or the season.

Safety is also a priority in the design of the Poulan 187594. The mower is equipped with a safety key that prevents accidental starts, ensuring that it can be operated safely around children and pets. Additionally, the mower features a durable chassis made from high-quality materials, which enhances its longevity and resilience.

Another notable characteristic of this model is its lightweight design, making it easy to maneuver across various terrains. The ergonomically designed handles provide increased comfort during operation, reducing fatigue while mowing larger lawns.

In summary, the Poulan 187594 is a reliable and feature-packed lawn mower that caters to a wide range of mowing needs. Its powerful engine, versatile cutting options, safety features, and user-friendly design make it an excellent choice for anyone looking to maintain their lawn with ease and efficiency. This mower is indeed a valuable addition to any landscaping arsenal.
Top Page Image Contents