Poulan 178379 Install Seat See Fig, Lower seat into operating position and sit on seat

Page 7

ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section, page 10, for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in freewheeling position to disengage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmission engaged" po- sition.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place motion control lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Release parking brake.

•Slowly move the motion control lever forward and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model NO. PO165H42C II. Slope Operation IV. ServiceSafe Operation Practices for Ride-On Mowers General OperationTable of Contents Customer Responsibilities Product SpecificationsSlope Sheet Unassembled PartsSteering Wheel Seat KeyTo Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorLower seat into operating position and sit on seat Install Seat See FigCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport See Figs To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips General Recommendations Customer ResponsibilitiesBefore Each USE Tractor Engine Muffler CleaningSpark Plugs To Remove Mower See Fig Service and AdjustmentsTo Level Mower Housing To Install Mower See FigBelt Removal To Adjust Brake See FigBelt Installation To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transaxle Motion Control Lever Neutral Adjustment See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentTo Attach Jumper Cables To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Remove Wheel for Repairs See FigTo Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PO165H42C SchematicElectrical KEY Part NO. NO. Description Chassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly KEY Part NO. NO. Description Engine KEY Part Description Seat Assembly Wheels & Tires DecalsMower Lift Nut Lock w/Wsh 1/2-13 Unc Mower Deck Repair Parts Service Notes Service Notes Limited Warranty Only Ride UP and Down Hill Suggested Guide for Sighting Slopes for Safe Operation

178379 specifications

The Poulan 178379 is a powerful and efficient chainsaw designed for both professional and home use. Known for its reliability, this chainsaw is ideal for a variety of tasks, including cutting firewood, trimming trees, and handling larger landscaping projects.

One of the standout features of the Poulan 178379 is its robust engine. With a displacement of 42cc, the chainsaw delivers strong performance and provides the necessary power to tackle tough cutting jobs with ease. The two-stroke engine operates efficiently, allowing for a smooth experience during operation.

The chainsaw is also equipped with a 16-inch guide bar, which offers optimal cutting length while maintaining maneuverability. This length is perfect for handling mid-sized branches and logs, making it a versatile choice for different cutting needs. The bar is paired with a chain that boasts a low kickback design, enhancing safety during use and reducing the likelihood of accidents.

In terms of technology, the Poulan 178379 incorporates advanced features to enhance user experience. It comes with an easy-to-use start system that minimizes the effort needed to start the chainsaw, making it accessible for users of all skill levels. The chainsaw also features an automatic oiler system, which ensures that the chain remains lubricated during operation, thereby extending the life of both the chain and the bar.

Another characteristic that sets the Poulan 178379 apart is its lightweight design. Weighing in at approximately 10 pounds, it is easy to handle for extended periods, reducing fatigue for the user. Additionally, the chainsaw has ergonomic handles that provide a comfortable grip, allowing for better control while cutting.

Maintenance is straightforward with the Poulan 178379. The design includes a tool-free chain tensioning system, enabling users to easily adjust chain tension without the need for additional tools. This feature not only saves time but also encourages regular maintenance, ensuring optimal performance over the lifespan of the chainsaw.

Overall, the Poulan 178379 combines power, efficiency, and user-friendly features, making it an excellent choice for anyone in need of a reliable chainsaw for both professional and recreational use. Its advanced technologies, lightweight design, and ease of maintenance make it a top contender in the competitive chainsaw market.
Top Page Image Contents