Connections, Maintenance and Service | Infinity TSS-SAT500 manual

CONNECTIONS

After placing the speakers, you are ready to connect your system. First, turn off all audio-system power. Use high-quality speaker wire to make your connections. #18-gauge speaker wire with polarity coding is included. For longer distances, #16-gauge or heavier wire is recommended. The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +). Also, consult the owner’s manuals that were included with your amplifier or receiver to confirm connection procedures. Observe polarities when making speaker connections, as shown in Figure

4.Connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker. Connect the – (black) terminals in the same way.

Important!

Do not reverse polarities (i.e., + to –, or – to +) when making connections. Doing so will cause poor imaging and diminished bass response. Be certain that positive and negative wire strands are completely isolated to avoid short circuits that may damage your equipment.

Press Connector

In and Hold

Insert Bare

End; Release

Connector

– +

Figure 4. Wiring diagram shows polarity connections for one channel of a home theater system.

MAINTENANCE AND SERVICE

The TSS-SAT500 enclosure may be cleaned using a soft cloth to remove fingerprints or to wipe off dust.

All wiring connections should be inspected and cleaned or remade periodically. The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions and other factors, but once per year is the minimum.

If a problem occurs, make sure that all connections are properly made and clean. If a problem exists in one loudspeaker, reverse the connection wires to the left and right system. If the problem remains in the same speaker, then the fault is with the loud- speaker. If the problem appears in the opposite speaker, the cause is in another component or cable. In the event that your TSS-SAT500 ever needs service, contact your local Infinity dealer or distributor, or visit www.infinitysystems.com for a service center near you.

TSS-SAT500 5

TSS-SAT500 specifications

The Infinity TSS-SAT500 is a cutting-edge satellite communication device that caters to a wide range of industries, from maritime and aviation to military and disaster recovery. This state-of-the-art terminal is engineered to provide reliable connectivity in harsh environments, ensuring seamless communication regardless of geographical constraints.

One of the key features of the Infinity TSS-SAT500 is its compact and robust design. The terminal is built to withstand extreme weather conditions, including high winds and heavy rain, making it ideal for use in maritime applications where reliability is paramount. With its lightweight materials and aerodynamically crafted exterior, the TSS-SAT500 is easy to transport and install, whether on a vessel or at a remote land site.

The device supports a wide frequency range, offering multiple bandwidth options that allow for high-speed data transmission. This ensures that users can send and receive large amounts of data quickly and efficiently. Additionally, the Infinity TSS-SAT500 employs advanced modulation technologies that optimize signal quality and enhance overall performance, significantly reducing latency and improving user experience during critical communications.

Another standout characteristic of the TSS-SAT500 is its compatibility with various satellite systems. This flexibility allows users to choose the most suitable service provider for their specific needs while ensuring global coverage. The device seamlessly integrates with networks like VSAT (Very Small Aperture Terminal), facilitating continuous connectivity even in remote locations where traditional communication methods are unavailable.

Security is also a top priority for the Infinity TSS-SAT500. The device employs advanced encryption protocols to safeguard sensitive data transmissions, making it an ideal choice for military communications and other secure operations. Furthermore, its user-friendly interface allows for easy monitoring and troubleshooting, enabling quick responses to any connectivity issues.

In conclusion, the Infinity TSS-SAT500 is an exceptional satellite communication solution that combines durability, flexibility, and advanced technology. Its main features, including robust design, high-speed data transmission, broad compatibility, and stringent security measures, make it a trusted choice for various critical applications across multiple industries. Whether for emergency response or routine maritime communication, the TSS-SAT500 stands ready to deliver uninterrupted connectivity in any environment.