Poulan 177925 Transaxle Motion Control Lever Neutral Adjustment See Fig, Front Wheel Camber

Page 23

SERVICE AND ADJUSTMENTS

BELT INSTALLATION -

•Install new belt around engine pulley first, then around transaxle pulley and lastly into all the idler pulleys.

•Check to be sure belt is positioned correctly and is on proper side of all belt keepers.

•Engage the drive belt tension handle and replace the retainer spring.

•Reinstall mower.

RETAINER

 

 

SPRING

 

 

DRIVE BELT

 

 

TENSION HANDLE

 

 

ENGINE PULLEY

 

TRANSAXLE

 

PULLEY

BELT KEEPER

 

 

FLAT IDLER

 

 

 

BELT

BELT

 

KEEPER

 

 

KEEPER

CLUTCHING

CLUTCHING

V-IDLER

FLAT IDLER

 

IDLER

 

FIG. 27

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 28)

The motion control lever has been preset at the factory and adjustment should not be necessary.

•Park tractor on level surface. Stop tractor by turning ignition key to “OFF” position and engage parking brake.

•Loosen the adjustment bolt in front of the right rear wheel.

•Move motion control lever to the neutral position (N).

•Tighten the adjustment bolt.

ADJUSTMENT

BOLT

FIG. 28

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See “PURGE TRANSMIS- SION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN ADJUSTMENT

Front wheel toe-in is required for proper steering operation. Toe-in was set at the factory and adjustment should not be necessary. If parts in the front axle or steering mechanism have been replaced or damaged, check toe-in and adjust if necessary.

TO CHECK TOE-IN (See Fig. 29)

•Position front wheels straight ahead.

•Measure distance between wheels at front and rear of tires (dimensions “A” and “B”).

•Front dimension “A” should be 1/8" to 1/4" less than rear dimension “B”.

TO ADJUST TOE-IN (See Figs. 29 and 30)

•Loosen jam nuts at adjustment sleeves on tie rod.

•Adjust tie rod until dimension “A” is 1/8" to 1/4" less than dimension “B”.

•Tighten jam nuts securely.

FRONT WHEEL CAMBER

The front wheel camber is not adjustable on your tractor. If damage has occurred to affect the front wheel camber, contact your nearest authorized service center/department.

B

FRONT OF TRACTOR

A

FIG. 29

ADJUSTMENT

SLEEVES

TIE ROD

JAM NUTS

23

FIG. 30

Page 22 Page 24
Image 23
Page 22 Page 24
Contents PRGT22H48A III. Children IV. ServiceGeneral Operation II. Slope OperationSafe Operation Practices for Ride-On Mowers Table of Contents Unassembled Parts To Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorAssemble Gauge Wheels to Mower Deck See Fig Install Seat See FigTo Attach Nose Roller See Fig Install Mower and Drive Belt See FigsCheck for Proper Position of ALL Belts Check Tire PressureCheck Mower Levelness Operation Know Your Tractor HOW to USE Your Tractor To Transport See Figs To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsBefore Each USE Customer ResponsibilitiesGeneral Recommendations Tractor Engine Engine OIL Filter CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower To Level Mower HousingTo Replace Mower Drive Belt FRONT-TO-BACK Adjustment See FigsBelt Removal To Adjust Attachment Clutch See FigTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigFront Wheel TOE-IN Adjustment Transaxle Motion Control Lever Neutral Adjustment See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentTo Remove Wheel for Repairs To Start Engine with a Weak Battery See FigReplacing Battery See Fig Interlocks and Relays To Adjust Attachment Lift Spring See FigTo Remove Hood and Grill Assembly See Fig To Replace Headlight BulbTo Adjust Carburetor To Adjust Throttle Control Cable See FigTo Adjust Choke Control See Fig Cylinders OtherFuel System Engine OILProblem Cause Correction Troubleshooting PointsOFF Service Notes Tractor - Model Number PRGT22H48A SchematicElectrical KEY Part Description Chassis and Enclosures Repair Parts 149 Ground DriveRepair Parts Steering Assembly Adapter, Wheel Steering Spark Arrester KIT EngineScrew Hex Hd Cap 5/16-18 x 3/4 KEY Part NO. NO. Description Seat AssemblyLift Assembly Mower Deck Repair Parts Wheels & Tires DecalsService Notes Service Notes Service Notes Limited Warranty SLO CUT OUT This Is a TtedParts and Service

177925, PRFT22H48A specifications

The Poulan PRFT22H48A, 177925 is a robust and versatile lawn tractor designed for homeowners seeking an efficient and reliable machine for maintaining their lawns. With its user-friendly features and advanced technology, this tractor promises to make yard work a breeze.

One of the standout features of the PRFT22H48A is its powerful engine. Equipped with a 22 horsepower Briggs & Stratton engine, this lawn tractor offers sufficient power to tackle tough mowing tasks, ensuring a clean and even cut across various terrains. The reliable engine technology promotes easy starting and smooth operation, eliminating the frustration often encountered with lesser machines.

The PRFT22H48A features a 48-inch cutting deck, allowing for efficient mowing over large areas. Its cutting deck is designed with three adjustable blades that can be easily set to various height levels, enabling the user to achieve the desired grass length while accommodating different grass types and seasonal variations. The deck's design also incorporates a washout port, making cleaning after use a simple task, which is essential for maintenance and longevity.

Another key characteristic of this lawn tractor is its hydrostatic transmission, which simplifies speed and direction control. Operators can enjoy a smooth and seamless driving experience without the hassle of shifting gears. The tractor’s tight turning radius enhances maneuverability, making it easy to navigate around trees and garden beds.

Comfort was clearly a priority in the design of the PRFT22H48A. The seat is designed for maximum comfort during extended use, featuring an adjustable position that suits different user heights. Additionally, the steering wheel is ergonomically designed, providing enhanced control and reducing fatigue.

Safety features are equally important, and the PRFT22H48A does not disappoint. It includes foot-operated brakes and a safety switch that automatically halts the blades when the operator leaves the seat, providing peace of mind while mowing.

Overall, the Poulan PRFT22H48A, 177925 lawn tractor combines power, efficiency, and comfort in a single machine. Its impressive features and technologies make it an ideal choice for homeowners seeking a reliable solution for achieving a well-manicured lawn. Whether dealing with routine grass cutting or tackling tougher landscaping projects, this lawn tractor is built to deliver exceptional performance and ease of use.
Top Page Image Contents