Poulan PR185H42STE Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 20

SERVICE AND ADJUSTMENTS

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place motion control lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key “OFF” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 18)

Mower will be easier to remove from the right side of tractor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and lift clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRAC- TOR, REMOVE THE FRONT LINKS AND HOOK THE CLUTCH SPRING INTO SQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 18)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide collar onto guide and secure with large retainer spring.

•Install belt onto engine pulley.

 

 

SUSPENSION ARMS

SQUARE HOLE

SMALL RETAINER SPRING

 

ENGINE PULLEY

 

 

 

 

 

CLUTCH SPRING

 

 

FRONT LINK

 

 

 

RETAINER SPRING

 

 

 

ANTI-SWAY BAR

 

 

RETAINER SPRINGS

COLLAR

 

 

 

 

(BOTH SIDES)

HOUSING GUIDE

LARGE

 

 

RETAINER

BRACKET

DEFLECTOR SHIELD

 

 

SPRING

 

 

Fig. 18

 

20

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PR185H42STE Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Table of Contents Slope Sheet Unassembled PartsSteering Wheel Seat Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To SET UP Your Mower for Mulching Check Tire PressureCheck Deck Levelness To Convert to Bagging or DischargingOperation Know Your Tractor Motion Control Lever Selects the speedHOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Towing Carts and Other ATTACH- MentsCheck Engine OIL Level ADD GasolineMowing Tips Purge TransmissionMulching Mowing Tips Lubrication Chart Service DatesCustomer Responsibilities General RecommendationsTractor Brake OperationTires Operator Presence SystemEngine Clean AIR Screen Clean AIR INTAKE/COOLING AreasCleaning Engine OIL FilterTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTransmission REMOVAL/REPLACEMENT Transaxle Motion Control Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsTo Replace Headlight Bulb To Attach Jumper CablesTo Replace Fuse To Adjust CarburetorInterlocks and Relays Storage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PR185H42STEElectrical KEY Part Description Chassis Screw Hex Wshd 8-18 x 7/8 Drive KEY Steering Assembly KEY Part NO. NO. Description Seat Assembly Decals Wheels and TiresSpark Arrester EngineOptional Equipment 170771 Control, Throttle Mower Deck Wheel, Gauge Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

PR185H42STE specifications

The Poulan PR185H42STE is a versatile riding mower designed to make lawn care effortless for homeowners. With a powerful engine and user-friendly features, this mower stands out as a reliable choice for managing larger lawns and properties.

One of the key features of the PR185H42STE is its robust 18.5 horsepower Briggs & Stratton engine. This engine provides the necessary power to tackle thick grass and uneven terrain with ease. The mower's engine is designed for easy starting and smooth operation, ensuring that users can get to work quickly without the frustration of difficult startups.

The PR185H42STE comes equipped with a 42-inch cutting deck, which enables users to cover more ground in less time. This mid-sized deck is ideal for navigating through tight spaces while still being large enough to handle larger areas efficiently. The cutting height can be easily adjusted to suit different grass types and cutting preferences, offering versatility for varied mowing conditions.

Another standout feature of this mower is its hydrostatic transmission, which provides seamless speed changes without the need for gear shifting. This allows for a smoother ride and easier control when maneuvering around obstacles or adjusting speed on slopes. The steering wheel is designed for comfort, providing users with a pleasant experience during those longer mowing sessions.

The Poulan PR185H42STE also emphasizes user comfort and safety. With a padded seat and armrests, operators can enjoy a more relaxed mowing experience. Additionally, safety features such as an automatic blade stop when the operator leaves the seat ensure safety while maintaining productivity.

To enhance efficiency, the mower is equipped with a mulching option. This feature allows users to finely chop grass clippings and return them to the lawn, which can improve soil health and promote a lush, green appearance. The mower's bagging capability also adds to its versatility, making it easy to collect clippings for disposal or composting.

Finally, consumer-friendly aspects like easy access to routine maintenance points ensure that upkeep is simple and straightforward. The Poulan PR185H42STE combines power, convenience, and comfort, making it an excellent choice for those seeking a reliable riding mower for their lawn care needs. Whether tackling routine maintenance or preparing for the growing season, this mower proves to be an indispensable gardening tool.
Top Page Image Contents