4 CONTAINER MOUNTING (See Fig. 4)
1.Install one container to left side fi rst with warning to outside of unit. Install another container to center position and one in right position.
NOTE: Right container should always overlap left container at center supports.
2. Close cover and lock latch handles over center support tubes.
CONTAINER
WARNING
CENTER
SUPPORT
TUBES
WAR | NING |
|
03022
COVER LATCH HANDLES
| WAR | NING |
|
| |
CONTAINER |
| CONTAINER |
HANDLE |
| WARNING |
FIG. 4
5 LOWER CHUTE (See Fig. 5)
1.Raise and hold deflector shield in upright position.
2.Place slot in lower chute over tab on mower and position lower chute over mower opening as shown.
3.Hook rear latch into flange hole on back of mower.
4.Hook front latch into tab hole on front of mower.
•If your tractor is equipped with gauge wheels on the deck, then it will be necessary to hook the rear latch into the hole in the R.H. gauge wheel bracket.
CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.
REAR GAUGE
WHEEL
BRACKET
DEFLECTOR SHIELD
HINGE BRACKET
EXTENDED EDGE "B"
Must be under deflector shield and along side the hinge bracket
DEFLECTOR
SHIELD
03058
TAB
FRONT LATCH
WITH REAR |
|
| FIG. 5 |
GAUGE WHEELS |
|
|
|
REAR LATCH | 6 | WITHOUT | REAR LATCH |
GAUGE WHEELS |
| ||
|
|