Infinity PS210W, PS212W Specifications, Maintenance and Service, Word About Wireless Products

Page 7

A Word About Wireless Products

Infinity wireless subwoofers utilize advanced wireless transceivers operating in the 2.4GHz frequency band.This is the same frequency band that is used for wireless home networks and high-quality cordless phones. It also allows for the transmission of high-performance, full-spectrum sound to remote locations, wirelessly.

Like all wireless devices, your Infinity wireless subwoofer’s operating range may vary, depending upon variables such as building construc- tion methods and materials, atmospheric conditions and other sources of interference. Please consult your Infinty dealer, or visit www.infinitysystems.com, for further information or assistance.

Wall-Mounting the Transmitter Module

NOTE: The customer is responsible for the correct selection and use of mounting hardware (available through hardware stores) that will ensure the proper and safe wall-mounting of the transmitter.

Step 1.

Insert the two M3 x 4 machine screws through the wall bracket and into the rear of the transmitter module, as shown in the figure below.

Step 2.

Attach the transmitter module with wall bracket to the wall, using suitable hardware and, if necessary, wall anchors.

SPECIFICATIONS

 

PS212W

PS210W

Frequency Response:

25Hz – 150Hz (±3dB)

27Hz – 150Hz (±3dB)

Amplifier RMS Power:

400 Watts

300 Watts

Amplifier Peak Power :

700 Watts

500 Watts

Crossover Frequencies:

50Hz – 150Hz (when activated);

50Hz – 150Hz (when activated);

 

24dB/octave; continuously adjustable

24dB/octave; continuously adjustable

Driver:

12" (300mm) MMD®

10" (250mm) MMD®

Operating Range:

Up to 75' (23m), depending

Up to 72' (22m), depending

 

upon conditions

upon conditions

RF Operating Frequency:

2.4GHz

2.4GHz

Dimensions (H x W x D):

 

 

Speaker (with grille)

18" x 14-3/8" x 18-3/4"

16-3/4" x 12-1/2" x 20-7/8"

 

(457mm x 365mm x 476mm)

(425mm x 318mm x 530mm)

Transmitter

1-1/8" x 4-7/8" x 3-7/8"

1-1/8" x 4-7/8" x 3-7/8"

 

(29mm x 124mm x 98mm)

(29mm x 124mm x 98mm)

Weight:

 

 

Speaker

44.7 lb (20.3kg)

43 lb (19.5kg)

Transmitter

0.5 lb (0.2kg)

0.5 lb (0.2kg)

The peak dynamic power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.

Features, specifications and appearance are subject to change without notice.

MAINTENANCE AND SERVICE

The enclosure may be cleaned using a soft cloth to remove finger- prints or to wipe off dust.

The grille may be gently vacuumed. Stains may be removed with an aerosol cleaner, following its instructions. Do not use any solvents on the grille.

All wiring connections should be inspected and cleaned or remade periodically. The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions and other factors, but once per year is the minimum.

In the event that your subwoofer ever needs service, contact your local Infinity dealer, or visit www.infinitysystems.com for a service center near you.

PS210W, PS212W (120V)

7

Image 7
Contents OWNER’S Guide This device may not cause harmful interference, PS210W, PS212WUnpacking the Subwoofer PlacementInfinity PS210W/PS212W Powered Subwoofers IntroductionPS210W Controls and ConnectionsRear Panels PS212WConnecting the Subwoofer for Wireless Applications Wireless WiredSystem Connections Operation Wall-Mounting the Transmitter Module SpecificationsMaintenance and Service Word About Wireless Products

PS212W, PS210W specifications

The Infinity PS210W and PS212W are two standout speakers designed to deliver high-quality audio, making them ideal for both home theater systems and music playback. These two models reflect Infinity’s commitment to superior sound performance combined with modern technological advancements.

One of the main features of the PS210W and PS212W is their advanced driver technology. Both speakers employ a powerful 10-inch subwoofer in the PS210W and a larger 12-inch subwoofer in the PS212W, allowing for deep, rich bass response that enhances the overall listening experience. The subwoofers are designed to produce low-frequency sounds with precision, which is critical for both movie soundtracks and music.

Another characteristic of these speakers is their Enclosure Design. Both models utilize a ported design that significantly reduces distortion while enhancing the efficiency of sound delivery. This design allows for a refined output and ensures that the bass remains tight and controlled without becoming overwhelming.

In terms of connectivity, the Infinity PS210W and PS212W feature versatile options for integration into various audio systems. They come with line level inputs, speaker level inputs, and RCA inputs, making it easier for users to connect them to receivers or amplifiers. This flexibility ensures compatibility with a wide range of audio equipment.

The PS210W and PS212W also incorporate advanced user-friendly controls, allowing listeners to tailor their audio experience. Built-in volume control, phase switch, and a low-pass filter enable users to adjust the sound output according to their preferences and room acoustics. This customization feature ensures that both models can be optimized for different environments, whether it be a cozy living room or a dedicated home theater.

Moreover, the sleek design of the Infinity PS series speakers enhances their aesthetic appeal. Clad in a modern finish, they not only perform well but also blend seamlessly with contemporary home decor. Their compact form factor makes them easy to place without occupying too much space.

In summary, the Infinity PS210W and PS212W speakers stand out for their deep bass response, versatile connectivity, advanced user controls, and elegant design. They are perfect choices for anyone looking to elevate their audio experience, whether it be for movies or music, providing rich, immersive sound that captivates listeners.