Using the Width Selector

Read the following instructions carefully. The example presented may not look like the graph you just created. Focus on the concepts and techniques presented. Specific cases will be discussed later.

Figure 13. Width Selector

You will use the Measurement Template just completed and the Width Selector to determine the correct width setting. The Width Selector graphically depicts a single resonant peak. The peak looks similar to a slice of a pie. See Figure 13. At the top of the Selector is a pull tab. When you slide the tab up and down, the width of the pie slice becomes narrower and wider, respectively. The pointers on the sides of the button point to the bandwidth that corresponds to the width of the slice.

Place the Width Selector over the Measurement Template, positioning the center rivet of the Selector over the response peak, as shown in Figure 14. Be sure to align the horizontal lines of the Width Selector with those of the Measurement Template.

Figure 14. Placement of the Bandwidth Selector

Apply pressure to the upper and lower left corners of the Selector using the thumb and forefinger of your left hand. Now gently slide the tab up or down until the adjustable slice most closely fits the response data. See Figure 15.

Figure 15. Selector adjusted for the “best fit”

TSS-SUB4000 10

TSS-SUB4000 specifications

The Infinity TSS-SUB4000 is a cutting-edge subwoofer that takes home audio systems to a whole new level. Renowned for its deep, powerful bass response, this model seamlessly integrates high-tech features with robust build quality, making it a standout choice for audiophiles and casual listeners alike.

One of the main features of the TSS-SUB4000 is its high-performance 12-inch driver. This driver is expertly engineered to deliver exceptionally rich and full low-frequency sounds, making it ideal for both music and movie playback. Complementing the driver is a powerful built-in amplifier that provides peak power output. This combination ensures that the subwoofer can handle demanding audio tracks without distortion, allowing listeners to fully experience the depth of their favorite songs and soundtracks.

The TSS-SUB4000 also incorporates advanced technologies, including a sophisticated bass reflex design. This design enhances airflow and reduces turbulence, resulting in clearer and tighter bass reproduction. The incorporation of a phase control feature allows users to fine-tune the subwoofer to match their listening environment, ensuring it integrates perfectly with their main speakers.

Another key characteristic of the Infinity TSS-SUB4000 is its versatile connectivity options. It comes equipped with both line-level and speaker-level inputs, providing flexibility for various setups. Whether used in a traditional stereo configuration or as part of a more complex home theater system, the TSS-SUB4000 adapts to any audio configuration with ease.

In terms of build quality, the subwoofer is housed in a robust enclosure designed to minimize resonance and unwanted vibrations. The sleek finish not only makes it visually appealing but also ensures durability, allowing it to withstand the rigors of regular use.

Moreover, the Infinity TSS-SUB4000 features intuitive controls located on the rear panel, enabling users to adjust volume, phase, and crossover frequency to optimize sound output according to their preferences.

In conclusion, the Infinity TSS-SUB4000 subwoofer stands out in its category due to its powerful bass performance, advanced technologies, and user-friendly design. It is a worthy investment for anyone looking to enhance their audio experience, ensuring that every note and sound effect is delivered with clarity and impact. This model represents the perfect blend of innovation and practicality, solidifying its position as a top choice among home audio solutions.