Poulan 545186808, 952802143 instruction manual

Page 20

abuse, neglect, improper maintenance, unap- proved modifications, or the use of parts not made or approved by the original equipment manufacturer. You are responsible for present- ing your small off--road engine to an Poulan au- thorized repair center as soon as a problem ex- ists. Warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized service center, call Poulan at 1--800--554--6723, or send e-mail correspondence to emission.warranty@ HCOP--emission.com. WARRANTY COM- MENCEMENT DATE: The warranty period begins on the date the small off--road engine is purchased. LENGTH OF COVERAGE: This warranty shall be for a period of two years from the initial date of purchase, or un- til the end of the product warranty (whichever is longer). WHAT IS COVERED: REPAIR OR REPLACEMENT OF PARTS. Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Poulan servicing center. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized service center, call Poulan at 1--800--554--6723, or send e-mail correspondence to emission.warranty@ HCOP--emission.com. WARRANTY PE- RIOD: Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is sched- uled for replacement as required mainte- nance shall be warranted for the period of time up to the first scheduled replacement point for that part. DIAGNOSIS: The owner shall not be charged for diagnostic labor which leads to the determination that a war-

ranted part is defective if the diagnostic work is performed at an approved Poulan servic- ing center. CONSEQUENTIAL DAMAGES: Poulan may be liable for damages to other engine components caused by the failure of a warranted part still under warranty. WHAT IS NOT COVERED: All failures caused by abuse, neglect, or improper maintenance are not covered. ADD-ON OR MODIFIED PARTS: The use of add--on or modified parts can be grounds for disallowing a warranty claim. Poulan is not liable to cover failures of warranted parts caused by the use of add-- on or modified parts. HOW TO FILE A CLAIM: If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized service center, call Poulan at 1--800--554--6723, or send e-mail corre- spondence to emission.warranty@HCOP-- emission.com. WHERE TO GET WAR- RANTY SERVICE: Warranty services or repairs shall be provided at all Poulan service centers. Call: 1--800--554--6723 or send e-mail correspondence to emission.warranty@ HCOP--emission.com. MAINTENANCE,

REPLACEMENT AND REPAIR OF EMIS- SION RELATED PARTS: Any Poulan ap- proved replacement part used in the perfor- mance of any warranty maintenance or repair on emission related parts will be pro- vided without charge to the owner if the part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST: Carburetor, air filter (covered up to maintenance schedule), ignition system: spark plug (covered up to maintenance schedule), ignition module, muffler including catalyst (if equipped), fuel tank. MAINTENANCE STATEMENT: The owner is responsible for the performance of all required maintenance as defined in the in- struction manual.

The information on the product label indicates which standard your engine is certified. Example: (Year) EPA and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)

Intermediate (125 hours)

Extended (300 hours)

20

Page 19 Page 20
Image 20
Page 19 Page 20
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlAvoid Pinch-Kickback Avoid Pull-InChain saws as set by Ansi B175.1 Kickback Safety FeaturesChain Brake and CKA Angle Ansi B175.1-2000 American National AssemblyAttaching the BAR & Chain If not Checking the tension Adjusting the tensionChain Tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineFuel Requirements Important Points to Remember Starting a Warm EngineDifficult Starting or starting a flooded engine Kickback occursBraking function control Caution The chain brake must be Inertia activating function controlOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Cutting a Fallen TreeImportant Points Types of Cutting Used for BuckingBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingService Inspect and Clean Unit and Decals Clean AIR FilterCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelChain Adjustment Replace Spark PlugTo Sharpen Chain Replace Fuel FilterCarburetor Adjustment StorageCooling System Seasonal StorageLoad Adjustment Engine EngineOther Empty fuel tank and refill withLigations The U.S. Environmental Canada, contactPoulan

952802143, 545186808 specifications

When it comes to outdoor power equipment, Poulan's 952802143 and 545186808 models stand out as reliable and efficient choices for homeowners and professionals alike. Known for their durability and performance, these models incorporate various features and technologies that enhance their functionality and ease of use.

The Poulan 952802143 model is designed with versatility in mind. It boasts a robust engine that provides ample power for tackling a range of yard tasks, such as trimming, edging, and pruning. The lightweight design of the equipment allows for easy maneuverability, ensuring that users can work for extended periods without fatigue. This model also features an adjustable cutting width, enabling users to customize it according to their specific needs, whether it’s for detailed work in tight spaces or for clearing larger areas.

In terms of technology, the 952802143 is equipped with a dual-line cutting head that facilitates efficient trimming while minimizing downtime. The automatic line advancement feature ensures that the cutting line is fed as needed, eliminating the hassle of manual adjustments and allowing for a seamless operation. Additionally, the ergonomic handle design provides a comfortable grip, which is key for prolonged use.

The Poulan 545186808 model is equally impressive, featuring a powerful engine that delivers exceptional performance while maintaining fuel efficiency. This model incorporates advanced anti-vibration technology, which significantly reduces operator fatigue and enhances overall comfort during operation. Furthermore, the 545186808 is equipped with an easy-start system that minimizes pull effort, making it an ideal choice for those who may have difficulty starting traditional models.

Another noteworthy characteristic of the 545186808 is its high-capacity fuel tank, which allows for longer working periods without the need for frequent refueling. This feature is particularly beneficial for larger landscaping tasks or for professionals who require sustained power throughout the day.

Both models highlight Poulan's commitment to quality and innovation. The combination of user-friendly features, advanced technology, and durable construction makes the 952802143 and 545186808 excellent additions to any outdoor toolkit. Whether you are a weekend warrior tackling weekend yard work or a professional landscaper, these models promise to deliver impressive results, making yard maintenance tasks more efficient and enjoyable.
Top Page Image Contents