Poulan 545186808, 952802143 Reduce the Chance of Kickback, Maintain Control, Avoid Pinch-Kickback

Page 4

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

S Pull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.

Avoid Pinch-Kickback:

S Be extremely aware of situations or ob- structions that can cause material to pinch the top of or otherwise stop the chain.

SDo not cut more than one log at a time.

SDo not twist the saw as the bar is with- drawn from an undercut when bucking.

Avoid Pull-In:

SAlways begin cutting with the engine at full

speed and the saw housing against wood. S Use wedges made of plastic or wood.

Never use metal to hold the cut open.

Kickback Path

Avoid Obstructions

Clear The Working Area

REDUCE THE CHANCE OF KICKBACK

S Recognize that kickback can happen. With a basic understanding of kickback, you can reduce the element of surprise which contributes to accidents.

SNever let the moving chain contact any ob-

ject at the tip of the guide bar.

SKeep the working area free from obstruc- tions such as other trees, branches, rocks, fences, stumps, etc. Eliminate or avoid any obstruction that your saw chain could hit while you are cutting. When cutting a branch, do not let the guide bar contact

branch or other objects around it.

SKeep your saw chain sharp and properly tensioned. A loose or dull chain can in- crease the chance of kickback occurring. Follow manufacturer’s chain sharpening and maintenance instructions. Check ten- sion at regular intervals with the engine stopped, never with the engine running. Make sure the bar nuts are securely tight- ened after tensioning the chain.

SBegin and continue cutting at full speed. If the chain is moving at a slower speed, there is greater chance of kickback occur-

ring.

SCut one log at a time.

SUse extreme caution when re-entering a previous cut.

SDo not attempt cuts starting with the tip of the bar (plunge cuts).

SWatch for shifting logs or other forces that could close a cut and pinch or fall into chain.

SUse the Reduced--Kickback Guide Bar and Low--Kickback Chain specified for your saw.

MAINTAIN CONTROL

Stand to the left of the saw

Thumb on underside of handlebar

Never reverse hand positions

Elbow locked

Thumb on underside of handlebar

SKeep a good, firm grip on the saw with both hands when the engine is running and don’t let go. A firm grip will help you reduce kickback and maintain control of the saw. Keep the fingers of your left hand encir- cling and your left thumb under the front handlebar. Keep your right hand com- pletely around the rear handle whether your are right handed or left handed. Keep your left arm straight with the elbow

locked.

SPosition your left hand on the front handle- bar so it is in a straight line with your right hand on the rear handle when making bucking cuts. Never reverse right and left

hand positions for any type of cutting.

SStand with your weight evenly balanced on

both feet.

SStand slightly to the left side of the saw to keep your body from being in a direct line

with the cutting chain.

SDo not overreach. You could be drawn or thrown off balance and lose control of the saw.

SDo not cut above shoulder height. It is diffi- cult to maintain control of saw above shoulder height.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Starting ReminderTions found in this manual Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyAnsi B175.1-2000 American National Chain Tension Adjusting the tensionChecking the tension Operation Fuel Requirements Before Starting Engine Fueling EngineBAR and Chain Lubrication Important Points to Remember Starting a Warm EngineDifficult Starting or starting a flooded engine Kickback occursBraking function control Caution The chain brake must be Inertia activating function controlOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Cutting a Fallen TreeImportant Points Types of Cutting Used for BuckingBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingService Inspect and Clean Unit and Decals Clean AIR FilterCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelChain Adjustment Replace Spark PlugTo Sharpen Chain Replace Fuel FilterCarburetor Adjustment StorageCooling System Seasonal StorageLoad Adjustment Engine EngineOther Empty fuel tank and refill withPoulan Canada, contactLigations The U.S. Environmental

952802143, 545186808 specifications

When it comes to outdoor power equipment, Poulan's 952802143 and 545186808 models stand out as reliable and efficient choices for homeowners and professionals alike. Known for their durability and performance, these models incorporate various features and technologies that enhance their functionality and ease of use.

The Poulan 952802143 model is designed with versatility in mind. It boasts a robust engine that provides ample power for tackling a range of yard tasks, such as trimming, edging, and pruning. The lightweight design of the equipment allows for easy maneuverability, ensuring that users can work for extended periods without fatigue. This model also features an adjustable cutting width, enabling users to customize it according to their specific needs, whether it’s for detailed work in tight spaces or for clearing larger areas.

In terms of technology, the 952802143 is equipped with a dual-line cutting head that facilitates efficient trimming while minimizing downtime. The automatic line advancement feature ensures that the cutting line is fed as needed, eliminating the hassle of manual adjustments and allowing for a seamless operation. Additionally, the ergonomic handle design provides a comfortable grip, which is key for prolonged use.

The Poulan 545186808 model is equally impressive, featuring a powerful engine that delivers exceptional performance while maintaining fuel efficiency. This model incorporates advanced anti-vibration technology, which significantly reduces operator fatigue and enhances overall comfort during operation. Furthermore, the 545186808 is equipped with an easy-start system that minimizes pull effort, making it an ideal choice for those who may have difficulty starting traditional models.

Another noteworthy characteristic of the 545186808 is its high-capacity fuel tank, which allows for longer working periods without the need for frequent refueling. This feature is particularly beneficial for larger landscaping tasks or for professionals who require sustained power throughout the day.

Both models highlight Poulan's commitment to quality and innovation. The combination of user-friendly features, advanced technology, and durable construction makes the 952802143 and 545186808 excellent additions to any outdoor toolkit. Whether you are a weekend warrior tackling weekend yard work or a professional landscaper, these models promise to deliver impressive results, making yard maintenance tasks more efficient and enjoyable.
Top Page Image Contents