Poulan 545137246 instruction manual Limbing and Pruning Important Points

Page 13

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting

small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

SLeave the larger limbs underneath the felled

tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs.

Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your first cut 1/3 of the way through the bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2.5 to 5 cm) collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

13

Image 13
Contents 545137246 11/30/06 Manual de Instrucciones Manuel d’InstructionsAlways use two hands when operating the chain saw Using the chain sawStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlChain Brake and CKA Angle Kickback Safety FeaturesIf your hand slips off the front handlebar Adjusting Screw Tensioning Rack AssemblyAttaching the BAR & Chain If not Chain Tension Adjusting the tensionChecking the tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineImportant Points to Remember Cation Always stop the engine before removing the oil capDifficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Operating TipsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingLimbing Limbing and Pruning Important PointsPruning Service Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill withLigations The U.S. Environmental Limited Warranty

545137246 specifications

The Poulan 545137246 is a versatile and robust chainsaw designed for both professional and homeowner use. With its powerful engine and practical features, it provides an efficient solution for cutting firewood, clearing brush, and tackling various outdoor tasks.

At the heart of the Poulan 545137246 is its high-performance 50cc engine, which delivers impressive power for demanding cutting jobs. This engine is designed for optimal fuel efficiency, allowing users to work longer without frequent refueling. The chainsaw also features an easy-start mechanism that ensures quick and reliable starting, even in cold or challenging conditions.

One of the standout features of the Poulan 545137246 is its 18-inch bar and chain. This length is ideal for tackling medium to large trees, offering a great balance between cutting capacity and portability. The chain is designed for durability and longevity, minimizing the need for frequent replacements, which is particularly beneficial for heavy use.

The chainsaw is equipped with a set of advanced technologies that enhance safety and performance. It includes an automatic oiler that keeps the chain and bar well-lubricated during operation, reducing friction and wear for smoother cuts. Additionally, the Poulan 545137246 features a chain brake system that provides instant stopping power in the event of kickback, ensuring user safety while operating the chainsaw.

Ergonomics play a crucial role in the design of the Poulan 545137246. The chainsaw is engineered with a comfortable grip and lightweight body, making it easier to handle during extended use. The vibration reduction technology integrated into the chainsaw reduces operator fatigue, allowing for longer working sessions without discomfort.

Another notable aspect is the easy-access air filter and spark plug, which promotes straightforward maintenance, ensuring the longevity of the machine. Users will appreciate the tool-less chain tensioning system, allowing for quick adjustments on the go.

In summary, the Poulan 545137246 is a reliable chainsaw that combines power, safety, and ease of use. Its blend of high-quality features, innovative technologies, and user-friendly design makes it an excellent choice for anyone looking to enhance their outdoor cutting capabilities. Whether you're a professional logger or a weekend warrior, this chainsaw is designed to meet your needs effectively and efficiently.