Placement

Left and Right Front Channels

For left and right front channels, place one satellite to the left and another to the right of the television, as shown in Figure 1. Since the speakers are magnetically shielded, you can place them very close to the TV without worrying about the magnetic field distorting the picture.

Center Channel

For the center channel, place the speaker directly on top of,

or below, your television. Use a shelf or one of the included wall brackets if the television does not provide a stable platform.

Surround Channels

For left and right surround channels, place one speaker on the left and another on the right, to the side of or slightly behind the listening area. The surround speakers should be mounted at a height of between 5 ft. (1.5m) and 7 ft. (2m).

Subwoofer

Since the installation of a subwoofer can be somewhat more complicated than installing full-range speakers, it is essential that you read this section very carefully prior to connecting the subwoofer to your system. Should you have questions relating to installation, it is advisable to call either your dealer or Infinity’s Customer Service Department for advice.

The performance of the subwoofer is directly related to its placement in the listening room and how you align the subwoofer with the satellite speakers. Setting the volume of the subwoofer in relation to the left and right speakers is also of critical importance because it is essential that the subwoofer integrate smoothly with the entire system. Setting the subwoofer’s volume level too high will result in an overpowering, boomy bass. Setting the volume level too low will negate the benefits of the subwoofer.

Here are several additional facts on installation that may prove useful. It is generally believed that low frequencies (below 125Hz) are nondirectional and, therefore, placement of a subwoofer within any listening room is not critical. While in theory it is true that the larger wavelengths of extremely low frequencies are basically nondirectional, the fact is that, when installing a subwoofer within the limited confines of a room, reflections, standing waves and absorptions generated within the room will strongly influence the performance of any subwoofer system. As a result, specific location of the subwoofer becomes important, and we strongly recommend that you experiment with placement before choosing a final location. Placement will depend upon your room (for example, whether or not your room permits placement of the subwoofer near either satellite) and the amount and quality of bass required.

Mounting on Floor Stands

Optional TSS-STAND1200 floor stands are available, should you prefer to place your TSS-1200 satellites on the floor; see your dealer or visit www.infinitysystems.com for more information.

In addition, there is a 1/4"-20 insert in each satellite that allows the satellite to be mounted to many third-party floor stands. Unscrew the rear foot to reveal the insert.

WALL-MOUNTING THE SATELLITES AND CENTER CHANNEL

The TSS-1200 satellites and center channel are designed to also be mounted on the wall. There is a fixed-mount wall bracket and an adjustable wall bracket provided for each satellite and the center channel. Each speaker bracket will require up to four

1-1/2" #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2" #10 screw.

IMPORTANT SAFETY NOTE: The customer is solely responsible for proper selection of mounting hardware not included with the speakers, and for proper assembly and installation of the wall brackets, including but not limited to the selection of appropriate weight-bearing supports and proper use of the bracket. Infinity disclaims any liability for the selection of mounting hardware and/or bracket installation. Be sure to follow these bracket assembly and installation instructions carefully. If you have any questions or doubts about your ability to correctly wall-mount the speakers, consult with your authorized Infinity dealer or custom installer.

Fixed-Mount Wall Bracket

Step 1. Remove the rear foot by loosening the screw on the bottom of the satellite.

Step 2. Mark the positions on the wall where you would like to place the mounting screws.

Step 3. Attach the back plate of the bracket to the wall using three screws (not included).

Step 4. Attach the front plate

(with the spring tab) of the bracket to the satellite or center channel usingthe two provided screws.

Step 5. Slide the satellite or center channel speaker with attached bracket front plate onto the back plate of the bracket until the tab locks into place.

To remove speaker from the wall, simply push in the locking tab and slide the speaker up.

TSS-1200 (120V)

TSS-1200, TOTAL SPEAKER SOLUTIONS specifications

Infinity TOTAL SPEAKER SOLUTIONS (TSS-1200) is a revolutionary sound system designed for both professional audio applications and home entertainment. With its cutting-edge technology and innovative features, the TSS-1200 delivers an exceptional audio experience that is sure to impress audiophiles and casual listeners alike.

One of the standout features of the TSS-1200 is its advanced speaker configuration. This system employs a two-way design, incorporating a robust 12-inch woofer and a high-frequency driver that ensures a well-balanced sound across all frequencies. The 12-inch woofer is designed to produce deep, powerful bass while maintaining clarity in the mid-range frequencies, making it ideal for music genres that demand both richness and precision.

The TSS-1200 also includes enhanced connectivity options. It features Bluetooth capabilities, allowing users to stream their favorite songs directly from smartphones or tablets. Additionally, the system offers HDMI ARC, optical, and auxiliary inputs, providing versatility and compatibility with a wide range of devices. This means that whether you’re using it for a home theater setup or to host a party, the TSS-1200 has you covered.

Another key characteristic of the TSS-1200 is its built-in amplification. The system incorporates a powerful amplifier that provides sufficient power to drive the speakers effectively, resulting in minimal distortion and a wider soundstage. This ensures that even at high volumes, the audio remains clean and dynamic, making it perfect for both small gatherings and larger events.

For those who value customization, the TSS-1200 features adjustable EQ settings. Users can tailor the sound profile to their liking, enhancing specific frequencies to suit different audio preferences or environments. This personalization allows for a more immersive listening experience, whether you’re watching movies, playing video games, or enjoying music.

Moreover, the TSS-1200 is designed with durability in mind. Its rugged construction ensures longevity, making it suitable for both indoor and outdoor usage. This level of robustness is essential for professional applications, where equipment is often subjected to rigorous conditions.

In conclusion, the Infinity TOTAL SPEAKER SOLUTIONS TSS-1200 stands out as a versatile, high-performance audio solution. Its exceptional features, from advanced speaker design to comprehensive connectivity options, make it an ideal choice for anyone seeking a reliable and immersive sound experience. Whether for personal use or professional settings, the TSS-1200 promises to elevate audio enjoyment to new heights.