Poulan 545137251 instruction manual Limbing and Pruning Important Points

Page 13

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting

small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

SLeave the larger limbs underneath the felled

tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs.

Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your first cut 1/3 of the way through the bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2.5 to 5 cm) collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 545137251 11/30/06 Manual de Instrucciones Manuel d’InstructionsPlan Ahead Starting ReminderTions found in this manual Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 Adjusting Screw Tensioning Rack AssemblyAttaching the BAR & Chain If not Adjusting Screw Adjusting the tensionChain Tension Checking the tensionOperation BAR and Chain Lubrication Before Starting Engine Fueling EngineImportant Points to Remember Difficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Operating TipsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingLimbing Limbing and Pruning Important PointsPruning Service Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill withLigations The U.S. Environmental Limited WarrantyNANCE, Replacement and Repair

545137251 specifications

The Poulan 545137251 is a powerful and versatile chainsaw that caters to both seasoned professionals and hobbyists alike. Designed for robust performance, this model is well-suited for a variety of cutting tasks, from felling trees to pruning branches and performing general yard maintenance. The chainsaw boasts a combination of user-friendly features and innovative technologies, making it a reliable choice for outdoor work.

One of the standout features of the Poulan 545137251 is its engine. Powered by a 50cc, 2-cycle engine, it offers a balance of power and efficiency. This engine ensures that users can tackle tough jobs without the need for frequent refueling. Additionally, the chainsaw is designed to minimize fuel consumption, which not only saves money but also reduces environmental impact.

The 18-inch cutting bar is another highlight of this model. This length strikes an excellent balance between maneuverability and cutting capability, allowing users to efficiently handle both small and medium-sized trees and branches. The bar is complemented by a high-quality chain designed to remain sharp longer, providing clean and smooth cuts while reducing the effort needed by the user.

Poulan has also integrated advanced technologies into the 545137251 to enhance user comfort and safety. The chainsaw is equipped with an Easy Start system, which reduces the effort needed for starting the engine, allowing for quick and hassle-free operation. Additionally, the chainsaw features an anti-vibration system that minimizes operator fatigue during extended use, making long hours of work more manageable.

Safety is paramount in any power tool, and the Poulan 545137251 does not compromise in this department. The chainsaw includes a chain brake that stops the chain almost instantaneously in the event of kickback, significantly enhancing user safety. Other design elements such as a protective handguard and ergonomic handles ensure that the tool is comfortable to use and provides a secure grip.

Finally, the Poulan 545137251 is built for durability. The durable casing protects the internal components, allowing the chainsaw to withstand harsh outdoor conditions. Regular maintenance features, such as an easy-access air filter, ensure that performing routine upkeep is straightforward, prolonging the life of the chainsaw.

Overall, the Poulan 545137251 stands out as an exceptional chainsaw that combines power, efficiency, and user comfort. With its durable construction and innovative features, it is an excellent tool for anyone looking to take on various cutting tasks with confidence and ease.
Top Page Image Contents