Poulan 545137231 instruction manual

Page 19

approved Poulan PRO servicing center. If you have any questions regarding your war- ranty rights and responsibilities, you should contact your nearest authorized service center or call Poulan PRO at

1--800--554--6723. WARRANTY PERIOD: Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspec- tion to the effect of “repair or replace as nec- essary” shall be warranted for 2 years. Any warranted part which is scheduled for re- placement as required maintenance shall be warranted for the period of time up to the first scheduled replacement point for that part. DIAGNOSIS: The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is de- fective if the diagnostic work is performed at an approved Poulan PRO servicing center. CONSEQUENTIAL DAMAGES: Poulan PRO may be liable for damages to other en- gine components caused by the failure of a warranted part still under warranty. WHAT IS NOT COVERED: All failures caused by abuse, neglect, or improper maintenance are not covered. ADD-ON OR MODIFIED PARTS: The use of add--on or modified parts

can be grounds for disallowing a warranty claim. Poulan PRO is not liable to cover fail- ures of warranted parts caused by the use of add--on or modified parts. HOW TO FILE A CLAIM: If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized service center or call Poulan PRO at 1--800--554--6723. WHERE TO GET WAR- RANTY SERVICE: Warranty services or re- pairs shall be provided at all Poulan PRO service centers. Call: 1--800--554--6723

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION RELATED PARTS: Any Poulan PRO approved replacement part used in the performance of any warranty maintenance or repair on emission related parts will be provided without charge to the owner if the part is under warranty. EMIS-

SION CONTROL WARRANTY PARTS LIST: Carburetor, ignition system: spark plug (covered up to maintenance schedule), igni- tion module, muffler including catalyst (if equipped), fuel tank (California only). MAIN- TENANCE STATEMENT: The owner is re- sponsible for the performance of all required maintenance as defined in the instruction manual.

The information on the product label indicates which standard your engine is certified. Example: (Year) EPA Phase 1 or Phase 2 and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)

Intermediate (125 hours)

Extended (300 hours)

19

Image 19
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Starting ReminderTions found in this manual Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionAvoid Pull-In Reduce the Chance of KickbackMaintain Control Avoid Pinch-KickbackIf your hand slips off the front handlebar Kickback Safety FeaturesChain Brake and CKA Angle Chain saws as set by Ansi B175.1Attaching the BAR & Chain If not AssemblyChain Tension Adjusting the tensionChecking the tension ON/STOP ON/STOP Switch Throttle TriggerOperation Know Your Chain SAWBefore Starting Engine Throttle LOCK-OUT Chain BrakeCHOKE/FAST Idle Lever Primer BulbRight Foot Through Rear Handle Important Points to RememberStarting a Warm Engine Difficult Starting or starting a flooded engineTree Felling Techniques Braking function control Caution The chain brake must beInertia activating function control Operating TipsImportant Points Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsService Check Fuel Mixture Level Inspect and Clean Unit and DecalsClean AIR Filter Cleaning the Spark ARREST- ING ScreenStorage Empty fuel tank and refill with Load Adjustment EngineEngine OtherLigations The U.S. Environmental Limited Warranty