Customer Responsibilities, General Recommendations

ENGINE

FRONT WHEEL BEARING ZERK

CUSTOMER RESPONSIBILITIES

MAINTENANCE SCHEDULE

FILL IN DATES

AS YOU COMPLETE

REGULAR SERVICE

		Check Brake Operation
		Check Tire Pressure
	T	Check Operator Presence and
	T	Interlock Systems
	R	Check for Loose Fasteners
	A	Sharpen/Replace Mower Blades
	C	Lubrication Chart
	T	Check Battery Level
	0	Check Battery Level
	R	Clean Battery and Terminals
		Check Transaxle Cooling
		Adjust Blade Belt(s) Tension
		Adjust Motion Drive Belt(s) Tension
		Check Engine Oil Level
		Change Engine Oil
	E	Clean Air Filter
	N	Clean Air Screen
	G	Inspect Muffler/Spark Arrester
	I	Replace Oil Filter (If equipped)
	N	Replace Oil Filter (If equipped)
	E	Clean Engine Cooling Fins
	E	Replace Spark Plug
		Replace Spark Plug
		Replace Air Filter Paper Cartridge
		Replace Fuel Filter

HOURS				HOURS	STORAGE
USE		HOURSHOURS		SEASON
EACH 8		HOURSHOURS
EACH 8	25	50	100
BEFOREEVERY EVERY EVERY EVERY EVERY BEFORE SERVICE DATES

1,2,3

1, 2

1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions.

3 - If equipped with oil filter, change oil every 50 hours.

4 - Replace blades more often when mowing in sandy soil.

5 - If equipped with adjustable system.

6 - Not required if equipped with maintenance-free battery. 7 - Tighten front axle pivot bolt to 35 ft.-lbs. maximum.

Do not overtighten.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.

Some adjustments will need to be made periodically to properly maintain your tractor.

All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

•Check engine oil level.

•Check brake operation.

•Check tire pressure.

•Check operator presence and interlock systems for proper operation.

•Check for loose fasteners.

LUBRICATION CHART¿
SPINDLE	SPINDLE
ZERK	ZERK

FRONT WHEEL ¿BEARING ZERK

SAE 30 OR 10W30 MOTOR OIL

¿REFER TO CUSTOMER RESPONSIBILITIES “ENGINE” ¡SECTION

IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI- CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-

15 DERED GRAPHITE TYPE LUBRICANT SPARINGLY.