Poulan 2004-01, 530164806 Fueling Engine, BAR and Chain Lubrication, Important Points to Remember

Page 9

WARNING: Remove fuel cap slow- ly when refueling.

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtainedby mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. Included with this saw is a 3.2 ounce container of oil. Pour the entire contents of this container into 1 gallon of gasoline to achieve the proper fuel mixture. DO NOT USE automotive oil or boat oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine Poulan or Poulan PROR bar and chain oil is recommendedto protect your unit against excessive wear from heat and friction. Poulan or Poulan PROR oil resists high temperature thinning. If Poulan or Poulan PROR bar and chain oil is not available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lubri-

cation.

SAlways stop the engine before removing the oil cap.

IMPORTANT

Experience indicates that alcohol--blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See STORAGE section for addi- tional information.

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CAR- BURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

To stop the engine move the ON/STOP

switch to the STOP position.

To start the engine hold the saw firmly on the ground as illustrated. Make sure the chain is free to turn without contacting any object.

Use only 15”---18” of rope per pull. Hold saw firmly while pulling starter rope.

Starter rope handle

Left hand on front

handle

Right foot through rear handle

IMPORTANT POINTS TO REMEMBER

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handleand let the rope rewind slowly.

For cold weather starting, start the unit at FULL CHOKE; allow the engine to warm up before squeezing the throttle trigger.

NOTE: Do not cut material with the choke/ fast idle lever at the FULL CHOKE position.

STARTING A COLD ENGINE (or warm engine after running out of fuel)

NOTE: In the following steps, when the choke/fast idle lever is pulled out to the full extent, the correct throttle setting for starting is set automatically.

ON/STOP SWITCH

(SIDE VIEW)

ON

STOP

1.Move ON/STOP switch to the ON posi- tion.

2.Pull out choke/fast idle to the full extent (to the FULL CHOKE position).

3.Slowly press primer bulb 6 times.

4.Pull the starter rope quickly with your right hand 5 times Then, proceed to the next step.

NOTE: If the engine sounds as if it is trying to start before the 5th pull, stop pulling and immediately proceed to the next step.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 530164806 1/14/04 Manual de Instrucciones Manuel d’InstructionsPlan Ahead Tions before attempting to use the unitHearing Afety Hat Protection Eye Snug Fitting Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Kickback Safety FeaturesMaintain Control Avoid Obstructions Clear The Working AreaComputed kickback angle CKA Table Chain Brake and CKA AngleLength 530044834 530051211Attachingthe BAR & CHAINIf not Cha in Brake Nuts Bar ToolMount the Bar Chain Tension Including units with chain already installed Adjusting the tensionGuide bar Adjusting Screw Checking the tensionKnow Your SAW ON/STOP SwitchThrottle Trigger Throttle LockoutBAR and Chain Lubrication Fueling EngineImportant Points to Remember To stop the engine move the ON/STOPDifficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlFelling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree Direction of FallCutting a Fallen Tree Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Bucking Without a SupportLimbing and Pruning Important Points PruningLimbing AIR FilterCarburetor Adjustment Cleaning the air filterBAR Maintenance Inspect Muffler and Spark Arresting ScreenChain Sharpening Need Service PART?Ignition Timing Spark PlugLoad Adjustment Engine Empty fuel tank and refill withPolicy of Electrolux Home Prod Ligations The U. S. Environmental NANCE, Replacement and Repair of Emission Related Parts AnyIntermediate 125 hours Extended 300 hours

2004-01, 530164806 specifications

The Poulan 530164806 is a key component in the realm of outdoor power equipment, tailored for those who seek quality and reliability in their gardening and landscaping tasks. Released as part of Poulan's commitment to delivering effective tools, this product stands out for its unique blend of durability and functionality, making it a staple for both amateur gardeners and professional landscapers.

One of the principal features of the Poulan 530164806 is its robust design. Built with high-quality materials, this tool is constructed to withstand the rigors of frequent use in various environments. Its lightweight frame allows users to operate it without excessive strain, while still ensuring it can handle tough tasks like trimming and cutting with ease.

The technology behind the Poulan 530164806 is impressive. It is equipped with advanced engine specifications that provide excellent power-to-weight ratio. This means that while it is easy to handle, it does not compromise on performance. The engine is designed for efficient fuel consumption, which not only saves money in the long run but also promotes environmental responsibility. The tool's low emissions are an added benefit, aligning with modern standards for sustainability in outdoor equipment.

Another notable characteristic of the Poulan 530164806 is its ergonomic design. The handle is crafted to ensure a comfortable grip, reducing user fatigue during extended operations. The design allows for easy maneuverability, which is especially useful for intricate landscaping tasks where precision is key. The intuitive controls provide straightforward operation, making it accessible even for those new to outdoor maintenance.

Maintenance of the Poulan 530164806 is hassle-free, with components that are designed for easy access and replacement, ensuring that the tool remains in peak condition. Its durability means fewer repairs and a longer lifespan, enabling users to focus more on their gardening rather than worrying about equipment failure.

In conclusion, the Poulan 530164806 embodies the perfect balance of power, efficiency, and user-friendly design. It caters to a broad audience by merging innovative technologies with traditional performance expectations. Whether it's for homeowners looking to maintain their yards or professionals undertaking large landscaping projects, this tool stands out as a reliable companion in outdoor endeavors. With its commitment to quality, Poulan continues to be a trusted name in the gardening and landscaping community.
Top Page Image Contents