Poulan 530163652 Chain Sharpening, Ignition Timing, Spark Plug, Need ASSISTANCE?

Page 15

Replace guide bar when the groove is worn, the guide bar is bent or cracked, or when exce-

ssheating or burring of the rails occurs. If re- placement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw.

CHAIN SHARPENING

Chain sharpening is a complicated task that requires special tools. We recommended you refer chain sharpening to a professional chain sharpener.

IGNITION TIMING

Ignition timing is fixed and nonadjustable.

SPARK PLUG

The spark plug should be replaced each year to ensure the engine starts easier and runs better.

1.Loosen 3 screws on cylinder cover.

2.Remove the cylinder cover.

3.Pull off the spark plug boot.

4.Remove spark plug from cylinder and dis- card.

5.Replace with Champion RCJ--7Y spark plug and tighten securely with a 3/4 inch socket wrench. Spark plug gap should be 0.025 inches.

6.Reinstall the spark plug boot.

7.Reinstall the cylinder cover and 3 screws. Tighten securely.

Screws

 

 

 

Cylinder

Spark

 

 

 

 

 

 

 

 

Cover

 

 

 

 

 

 

 

 

 

 

Plug Boot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Spark

 

 

 

 

 

Plug

 

 

 

 

 

STORAGE

WARNING: Stop engine and allow to cool, and secure the unit before storing or transporting in a vehicle. Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. Store unit with all guards in place. Position so that any sharp object cannot accidentally cause injury to passersby. Store the unit out of reach of children.

SBefore storing, drain all fuel from the unit.

Start engine and allow to run until it stops.

SClean the unit before storing. Pay particu- lar attention to the air intake area, keeping it free of debris. Use a mild detergent and sponge to clean the plastic surfaces.

SDo not store the unit or fuel in a closed area where fuel vapors can reach sparks or an open flame from hot water heaters, electric motors or switches, furnaces, etc.

SStore in a dry area out of the reach of chil- dren.

CAUTION: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose, or fuel tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to fuel mixture separation and formation of acids during storage. Acidic gas can damage the engine.

NEED ASSISTANCE?

Call 1--800--554--6723.

NEED SERVICE PART?

Contact your authorized service dealer.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionYour left arm straight with the elbow locked Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlBack toward the operator Chain Brake and CKA AngleComputed kickback angle CKA Table Front Hand Guard, designed to reduceAttaching the BAR & Chain If not Tip BarCutters Depth Gauge Drive Links Adjusting the tension Chain Tension Including units with chain already installedChecking the tension Throttle Lockout ON/STOP SwitchKnow Your SAW Throttle TriggerRight foot through rear handle Fueling EngineBAR and Chain Lubrication Important Points to RememberInertia activating function control Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function control Caution The chain brake must beTree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Bucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingAIR Filter PruningLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the air filterCarburetor Adjustment BAR MaintenanceSpark Plug Need Service PART?Chain Sharpening Ignition TimingTroubleshooting Table Cause Remedy Ligations The U. S. Environmental Your Warranty Rights and OB

530163652 specifications

The Poulan 530163652 is a high-performance chainsaw that has gained significant popularity among both amateur and professional users. Its robust design and advanced features make it an ideal tool for various cutting tasks, whether for pruning trees, chopping firewood, or tackling larger forestry jobs.

One of the standout features of the Poulan 530163652 is its powerful engine. Equipped with a reliable 2-cycle engine, this chainsaw delivers high performance while maintaining fuel efficiency. This balance ensures that users can complete their tasks without frequent refueling, making it a convenient choice for extended projects.

Another prominent characteristic of the Poulan 530163652 is its lightweight construction. Weighing in at manageable levels, this chainsaw is designed for ease of use, reducing fatigue during extended operation. The lightweight nature, combined with an ergonomic handle, allows for comfortable maneuverability, making it suitable for both novice and experienced operators.

The chainsaw features an automatic oiling system, which ensures a constant supply of lubrication to the chain and bar. This technology reduces friction, enhances cutting performance, and prolongs the life of the chainsaw. With an easy access chain tensioning system, users can quickly adjust the tension without the need for additional tools, saving time and enhancing user convenience.

Safety is paramount in any chainsaw, and the Poulan 530163652 includes essential safety features such as a chain brake that can be activated in the event of kickback. The protective handguard also adds an extra layer of safety, shielding the operator’s hands from debris and accidental contact with the chain.

In terms of maintenance, the Poulan 530163652 is designed for simplicity. The accessible air filter and spark plug make routine maintenance tasks straightforward, allowing users to keep their chainsaw in optimal working condition with minimal hassle.

In summary, the Poulan 530163652 is a well-rounded chainsaw that combines power, efficiency, and safety features. Its lightweight design, automatic oiling system, easy chain adjustment, and user-friendly maintenance make it a top choice for those looking to tackle cutting tasks effectively and safely. Whether for home use or professional applications, this chainsaw stands out as a reliable tool that delivers consistent results.
Top Page Image Contents