Poulan 530165213 Starting a Cold Engine, Starting a Flooded Engine, Blower Vacuum

Page 7

DHold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects.

STARTING POSITION

Blower

Vacuum

WARNING: When starting engine, hold the unit as illustrated. Do not set unit on any surface except a clean, hard area when starting engine or while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through the discharge opening, damaging the unit or property, or causing serious injury to by- standers or the operator.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE

1.Move throttle lever to the position.

2.Move choke lever to the FULL CHOKE position.

3.Slowly press the primer button 8 times.

Throttle Lever

Primer Button

Choke Lever

4.Pull starter rope sharply until engine at- tempts to run, but no more than 5 pulls (be- low 30_ F, 8 pulls).

NOTE: If engine attempts to start before the 5th pull, go to next step immediately.

5.Move the choke lever to the HALF CHOKE position.

6.Pull the starter rope sharply until the en- gine runs, but no more than 5 pulls (below 30_ F, 10 pulls).

7.After a 5 second warm--up, move the choke lever to the RUN position.

8.Allow the unit to run for 30 more seconds at the RUN position before moving the

throttle lever to the position.

If engine has not started after 5 pulls (at HALF CHOKE), repeat STARTING A COLD ENGINE procedure. If engine still does not start, proceed to STARTING A FLOODED ENGINE.

9.To stop the engine, move the throttle lever to the STOP position.

STARTING A WARM ENGINE NOTE: If fuel tank is empty, add fuel; then, follow STARTING A COLD ENGINE proce- dure. Do not fill fuel tank while engine is hot.

1.Move throttle lever to the position.

2.Pull starter rope sharply until engine runs, but no more than 5 pulls.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

3.To stop the engine, move the throttle lever to the STOP position.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position. Move throttle

lever to the fast position ; then, pull rope until engine starts. After engine starts, move the

throttle lever to the slow position

to allow

engine to idle.

 

Starting could require pulling the starter rope many times depending on how badly the unit is flooded.

If unit still doesn’t start refer to the TROUBLE- SHOOTING TABLE or call 1-800-554-6723.

-- 7 --

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 15/04 PBV200 LEHandle Fuel with CAUTION, IT is Highly Flammable Safety RulesKnow Your Unit Plan AheadMaintain Your Unit Properly AssemblyBlower Tube Assembly Vacuum BAG AssemblyVacuum Vacuum Tube AssemblyHOW to Convert Unit from Vacuum USE to Blower USE OutletOperation To Stop the Engine Operating PositionOperating Tips Before Starting Engine Fueling EngineThrottle lever to the position Starting a Cold EngineStarting a Flooded Engine Blower VacuumMaintenance Storage Engine Troubleshooting Table Cause RemedyOther EPA/CALIFORNIA Emission Control Warranty Statement Limited WarrantyTions The U.S. Environmental Protection Emission Control Warranty Parts

530165213 specifications

The Poulan 530165213 is a versatile and reliable chainsaw that appeals to both homeowners and professional users alike. Known for its efficient performance and user-friendly design, this chainsaw is well-suited for a variety of cutting tasks, from pruning trees and shrubs to tackling larger limbs and logs.

One of the standout features of the Poulan 530165213 is its powerful engine. Equipped with a robust two-stroke engine, this chainsaw delivers strong performance with a low weight, making it easier to handle for extended periods. The engine is designed for efficient fuel consumption, providing users with longer run times between refueling, which is especially useful for larger projects.

The chainsaw incorporates an easy-to-use start mechanism that minimizes the effort required to get the tool running. This is complemented by an automatic oiler system that keeps the chain lubricated during operation, reducing friction and wear, ultimately extending the life of the chainsaw. Users can focus on their cutting tasks without worrying about constant maintenance.

Safety features are also prominent in the design of the Poulan 530165213. It includes a chain brake that quickly stops the chain in case of kickback, providing an added layer of security for the operator. Additionally, the tool is equipped with a handguard to protect users from debris, and its lightweight design helps to reduce fatigue, allowing for increased accuracy and control during operation.

The Poulan 530165213 boasts a durable construction, designed to withstand the demands of regular use. Its quality components are engineered for durability, making it a dependable choice for those in need of a reliable cutting tool. The chainsaw's adjustable tensioning system is simple to use, ensuring that the chain remains secure and appropriately aligned for optimal performance.

Overall, the Poulan 530165213 stands out in the competitive chainsaw market due to its combination of power, safety, and user-friendliness. Whether for residential use in maintaining a yard or for professional landscaping, this chainsaw offers the versatility and reliability that users require. With its thoughtful design and effective features, the Poulan 530165213 is a solid investment for anyone looking to tackle cutting tasks with confidence and ease.
Top Page Image Contents