Operation, Power On | Infinity SW-12 specification

OPERATION

Power On

Plug your subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver.

Initially set the Subwoofer Level (Volume) Control ª to the “min” position.

Turn on your sub by pressing the Power Switch ‹ on the rear panel.

Auto On/Standby

With the Power Switch ‹ in the ON position, the Power Indicator LED ¶ will remain backlit in red or green to indicate the On/Standby mode of the subwoofer.

RED = STANDBY (No signal detected, Amp Off) GREEN = ON (Signal detected, Amp On)

The subwoofer will automatically enter the Standby mode after approximately 10 minutes when no signal is detected from your system. The subwoofer will then power ON instantly when a signal is detected. During periods of normal use, the Power Switch ‹ can be left on. You may turn off the Power Switch ‹ for extended periods of nonoperation, e.g., when you are away on vacation.

Adjust Gain

Turn on your entire audio system and start a CD or movie soundtrack at a moderate level. Turn up the Subwoofer Level (Volume) Control ª about half way. If no sound emanates from the subwoofer, check the AC-line cord and input cables. Are the connectors on the cables making proper contact? Is the AC plug connected to a “live” receptacle? Has the Power Switch ‹ been pressed to the “On” position? Once you have confirmed that the subwoofer is active, proceed by playing a CD, record or cassette. Use a selection that has ample bass information.

Set the overall volume control of the preamplifier or stereo to a comfortable level. Adjust the Subwoofer Level (Volume) Control ª until you obtain a pleasing blend of bass. Bass response should not overpower the room but rather be adjusted so there is a harmonious blend across the entire musical range. Many users have a tendency to set the subwoofer volume too loud, adhering to the belief that a subwoofer is there to produce lots of bass. This is not entirely true. A subwoofer is there to enhance bass, extending the response of the entire system so the bass can be felt as well as heard. However, overall balance must

be maintained or the music will not sound natural. An experienced listener will set the volume of the subwoofer so its impact on bass response is always there but never obtrusive.

Crossover Adjustments

NOTE: This control will have no effect if the Normal/LFE Selector Switch § is set to “LFE.” If you have a Dolby Digital or DTS processor/receiver, the Crossover Frequency is set by the processor/receiver. Consult your owner’s manual to learn how to view or change this setting.

The Crossover Adjustment Control • determines the highest frequency at which the subwoofer reproduces sounds. If your main speakers can comfortably reproduce some low-frequency sounds, set this control to a lower frequency setting, between 50Hz and 100Hz. This will concentrate the subwoofer’s efforts on the ultradeep bass sounds required by today’s films and music. If you are using smaller bookshelf speakers that do not extend to the lower bass frequencies, set the Crossover Adjustment Control to a higher setting, between 120Hz and 150Hz.

Phase Control

The Phase Switch ∞ determines whether the subwoofer speaker’s piston-like action moves in and out with the main speakers, 0,˚ or opposite the main speakers, 180˚. Proper phase adjustment depends on several variables such as room size, subwoofer placement and listener position. Adjust the phase switch to maximize bass output at the listening position.

SW-12 4

SW-12 specifications

The Infinity SW-12 is a powerful and sophisticated subwoofer designed to deliver explosive bass and exceptional sound performance, making it a popular choice among audio enthusiasts and home theater advocates alike. Known for its robust build quality and impressive audio fidelity, the SW-12 stands out in its class.

One of the main features of the Infinity SW-12 is its 12-inch high-excursion driver, which is engineered to provide deep, punchy bass response that can effectively fill any room. The large cone area allows for greater air displacement, resulting in greater sound pressure levels and more impactful bass. This driver is complemented by a built-in 300-watt amplifier, ensuring that the subwoofer can handle high volume levels while maintaining clarity and precision.

The SW-12 employs advanced digital signal processing technology, which optimally manages the audio output, providing listeners with a seamless integration into their existing audio systems. This technology includes adjustable phase control, which helps to ensure that the sound waves produced by the subwoofer are in sync with those from the main speakers, preventing cancellation effects and resulting in a fuller, more coherent soundstage.

Another notable characteristic of the Infinity SW-12 is its versatile connectivity options. It features both high-level and low-level inputs, allowing it to connect easily with a wide range of audio systems, from stereo setups to elaborate home theater configurations. The integrated crossover control allows users to customize the cutoff frequency, permitting a tailored audio experience based on individual preferences and the specifics of the listening environment.

The cabinet design of the SW-12 is engineered with a focus on reducing vibration and resonance. Constructed from durable MDF (Medium Density Fiberboard), the enclosure is both solid and aesthetically pleasing, enabling it to blend with various decors without compromising sound quality. Additionally, the subwoofer includes adjustable feet for fine-tuning placement, which is essential for optimal sound performance.

In summary, the Infinity SW-12 subwoofer combines advanced technology, impressive power, and user-friendly features to create a compelling audio experience. Whether used in a dedicated home theater or a music listening room, its quality construction and performance make it an outstanding choice for those seeking deep, resonant bass and overall sonic excellence.