Poulan 3000B instruction manual Know Your Unit, Plan Ahead

Page 2

WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

KNOW YOUR UNIT

SRead your instruction manual carefully until you completely understand and can follow all warnings and safety rules before operat-

ing this attachment.

DRestrict use of this attachment to users who understand and will follow all warnings and safety rules in this manual.

PLAN AHEAD

WARNING: Inspect area before use. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

DAlways wear eye protection when operat- ing, servicing, or performing maintenance on this attachment. Wearing eye protection will help to prevent rocks or debris from be- ing blown or ricocheting into eyes and face which can result in blindness and/or seri- ous injury. Eye protection should be

marked Z87.

D Always wear foot protection. Do not go barefoot or wear sandals.

DAlways wear respirator or face mask when

working with unit in dusty environments.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or cloth- ing with loosely hanging straps, ties, tas- sels, etc. They can be caught in moving

parts.

DDo not operate unit when you are tired, ill, upset, or if you are under the influence of al-

cohol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 meters) when starting or operating unit. Do not point blower discharge opening in the direction of people or pets.

FUEL SAFETY (for gas powerheads)

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel purposes.

D Do not smoke while handling fuel or while operating the unit.

DMake sure the attachment is properly as-

sembled and in good operating condition.

DDo not fill fuel tank while engine is running. D Avoid spilling fuel or oil. Wipe up fuel spills

before starting engine.

D Move at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

ELECTRICAL SAFETY (for electric powerheads)

WARNING: Avoid a dangerous envi- ronment. To reduce the risk of electrical shock, do not use in rain, in damp or wet locations, or around swimming pools, hot tubs, etc. Do not expose to snow, rain, or water to avoid the pos- sibility of electrical shock. Do not handle exten- sion cord plug or unit with wet hands.

DUse only a voltage supply as shown on the nameplate of the powerhead.

D Avoid dangerous situations. Do not use in presence of flammable liquids or gases to avoid creating a fire or explosion and/or caus- ing damage to unit.

DAvoid dangerous environments. Do not use in unventilated areas or where dust or explo- sive vapors can build up

DTo reduce the risk of electrical shock, use extension cords specifically marked as suitable for outdoor appliances. The elec- trical rating of the cord must not be less than the rating of the unit. The cord must be marked with the suffix “W-A” (in Canada, “W”). Make sure your extension cord is in good condition. Inspect extension cord be- fore use and replace if damaged. An under- sized extension cord will cause a drop in line voltage resulting in loss of power and

overheating. If in doubt, use the next heavi- er gauge. The smaller the gauge number, the heavier the cord.

DDo not use multiple cords.

DThe powerhead may have a polarized plug (one blade is wider than the other); if so, it will require the use of a polarized extension cord. The appliance plug will fit into a polar- ized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will re- quire the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If plug does not fit fully into the wall outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install the proper wall outlet. Do not change the equip- ment plug, extension cord receptacle, or extension cord plug in any way.

DDo not attempt to repair unit. Inspect the insu-

lation and connectors on the powerhead and extension cord before each use. If there is any damage, do not use until damage is re- paired by your authorized service dealer.

DDo not pull or carry by cord; do not use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

D Do not use the powerhead if the switch does not turn the unit on and off properly.

-- 2 --

Image 2
Contents Manual de Instrucciones Manuel d’Instructions Know Your Unit Plan AheadMaintain Your Unit Properly Blower SafetyDouble Insulation Construction Transporting and StorageKnow Your Blower Attachment Operating the Coupler Installing AttachmentInstalling Attachment Hanger Operating PositionSeasonal Storage Inspect and Clean Unit LabelsCheck for Loose Fasteners and Parts

3000B specifications

The Poulan 3000B is a versatile and rugged chainsaw that has gained popularity among both casual users and professionals in the realm of forestry and landscaping. Designed to tackle a range of cutting tasks, this model showcases several features and technologies that enhance performance, safety, and user comfort.

One of the standout features of the Poulan 3000B is its powerful engine. Equipped with a 30cc 2-cycle engine, this chainsaw delivers ample power to handle light to medium-duty cutting, making it ideal for tasks such as trimming branches, fell small trees, and cutting firewood. The engine is designed for efficient fuel consumption, allowing for longer operation times before refueling.

The Poulan 3000B utilizes a 16-inch bar and chain, providing the user with a balance of maneuverability and cutting capacity. The length of the bar makes it suitable for various applications while ensuring that it remains lightweight and easy to handle. The chain features low-vibration technology, which significantly reduces fatigue during extended use.

Another notable feature of the Poulan 3000B is its automatic oiler system. This technology ensures that the chain remains well-lubricated during operation, reducing wear and tear and enhancing cutting efficiency. The adjustable oil flow allows users to customize lubrication based on their specific cutting conditions.

Safety is a priority with the Poulan 3000B, which is equipped with several safety features. The chainsaw includes a chain brake that activates in the event of kickback, providing an essential layer of protection. Additionally, the rear handguard and front hand grip are designed to improve operator control and stability during use.

User comfort is further enhanced by the ergonomically designed handle, which provides a firm grip and reduces vibration. This is particularly beneficial during prolonged periods of operation, ensuring that the user can work more efficiently and with less discomfort.

In terms of maintenance, the Poulan 3000B is designed for easy access to key components, allowing users to perform routine checks and repairs with minimal hassle. This aspect ensures that the chainsaw remains in optimal working condition, extending its lifespan.

Overall, the Poulan 3000B is a robust chainsaw that combines power, efficiency, and safety features. Its well-rounded design makes it an excellent choice for homeowners and professionals alike, capable of meeting a variety of cutting demands with ease. Whether for yard maintenance or light logging, the Poulan 3000B proves to be a reliable and effective tool in the chainsaw market.