Poulan 2150, 2075, 2050, 2025, 2175, 2375, 2350 instruction manual Attaching the BAR & Chain If not

Page 6

NOTE: If this saw is to be used for com- mercial logging, a chain brake is required and shall not be removed or otherwise dis- abled to comply with Federal OSHA Regula- tions for Commercial Logging.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arresting screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer or call 1-800--554--6723.

STANDARDS: This saw is listed by Under- writer’s Laboratories, Inc., in accordance with: ANSI B175.1-2000American National Standards for Gasoline--Powered Chain Saws -- Safety Requirements

CSA Z62.1-1995Chain Saws -- Occupa- tional Health and Safety

CSA Z62.3-1996Chain Saw Kickback Oc- cupational Health and Safety

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is properly assembled and all fasteners are secure. Al- ways wear gloves when handling the chain.

6

The chain is sharp and can cut you even when it is not moving!

SLoosen and remove the chain brake nuts

and the chain brake from the saw.

S Remove the plastic shipping spacer (if present).

Location of shipping spacer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chain Brake

Chain Brake

Nuts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar Tool

SAn adjusting pin and screw is used to adjust the tension of the chain. It is very important when assembling the bar, that the pin located on the adjusting screw aligns into a hole in the bar. Turning the screw will move the ad- justment pin up and down the screw. Locate this adjustment before you begin mounting the bar onto the saw. See illustration below.

Inside view of

Chain Brake

Adjustment located on Chain Brake

STurn the adjusting screw by hand counter- clockwise until the adjusting pin just

touches the stop. This should allow the pin to be near the correct position.

S Slide guide bar behind clutch drum until guide bar stops against clutch drum sprocket.

Mount the Bar

SCarefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Handle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackMaintain Control Kickback Safety FeaturesReduce the Chance Kickback Avoid Obstructions Clear The Working AreaSume That the Chain Brake will Chain Brake and CKA AngleResent and YOU should not AS Protect YOU in the Event of aInside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & Chain If notAdjusting the tension Checking the tensionChain Tension Throttle Trigger ON/STOP SwitchKnow Your Chain SAW Throttle LOCK-OUTFueling Engine BAR and Chain LubricationImportant Points to Remember Braking function control Caution The chain brake must be Starting a Warm EngineDifficult Starting or starting a flooded engine Inertia activating function controlTree Felling Techniques Felling Large Trees Notch CUT and Felling the TreeTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Without a SupportLimbing Cleaning the air filterLimbing and Pruning Important Points PruningBAR Maintenance Cleaning the Spark ARREST- ING ScreenCarburetor Adjustments Inspect Muffler and Spark Arresting ScreenIgnition Timing Need Service PART?Chain Sharpening Spark PlugTroubleshooting Table Cause Remedy Your Warranty Rights and OB Ligations The U.S. Environmental
Related manuals
Manual 18 pages 49.36 Kb

2150, 2350, 2375, 2175, 2025 specifications

The Poulan series of chainsaws, including models such as the 2075, 2150, 2050, 2375, and 2025, represents a robust and reliable range suited for both professional and home user needs. Each of these models features unique attributes, making them popular choices in the chainsaw market.

The Poulan 2075 is known for its powerful 2-cycle engine, which delivers significant torque and performance. With a bar length ranging from 16 to 20 inches, it is versatile enough for cutting tasks ranging from light pruning to heavy-duty felling. The chainsaw is equipped with an automatic oiler, ensuring that the chain remains lubricated during operation, which enhances chain life and cutting efficiency.

The Poulan 2150 model boasts a lightweight design, making it easy to maneuver, yet it retains ample power for various cutting jobs. This model includes a dual-Trigger safety system that helps prevent accidental starts, enhancing safety for the user. Its Easy Start technology allows for smoother starting with minimal effort.

Moving to the Poulan 2050, this model is often favored for its compact size and balance, which aid in reducing user fatigue. It is particularly effective for homeowners looking to handle routine yard work. Its 20-inch bar combined with a solid cutting speed makes it a reliable choice for trimming branches and cutting firewood. The 2050 also features an easily accessible air filter, allowing for convenient maintenance.

The Poulan 2375 is designed for more intensive, commercial-grade tasks with a higher engine power output. This model features a larger fuel tank capacity which means extended operating time between refuels. The inclusion of a vibration dampening system ensures comfort during prolonged use, reducing hand fatigue and increasing precision in cutting.

Lastly, the Poulan 2025 focuses on the essentials for users who desire simplicity without compromising on quality. This model is often used for light duty tasks but is designed to handle occasional tougher jobs as well. Its lightweight construction and easy-start mechanism make it ideal for those new to chainsaw operation.

Overall, the Poulan chainsaw family offers a wide variety of features and technologies that cater to different user needs. With a strong focus on safety, ease of use, and maintenance, these models are designed to provide efficiency and reliability, making them suitable for both occasional users and professionals alike.
Top Page Image Contents