Poulan 2175, 2075, 2050, 1975, 2055, 1950, 2375, 2350, 2155, 2150 Troubleshooting Table Cause Remedy

Page 16

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

TROUBLE

CAUSE

 

REMEDY

 

 

 

 

 

Engine will not

S

Ignition switch off.

S

Move ignition switch to ON.

start or will run

S

Engine flooded.

S

See “Difficult Starting” in

only a few

 

 

 

Operation Section.

seconds after

S

Fuel tank empty.

S Fill tank with correct fuel mixture.

starting.

S

Spark plug not firing.

S

Install new spark plug.

 

S

Fuel not reaching

S

Check for dirty fuel filter; replace.

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

repair or replace.

 

 

 

 

 

Engine will

S

Carburetor requires

S

Contact an authorized service dealer.

not idle

 

adjustment

 

 

properly.

S

Crankshaft seals worn.

S

Contact an authorized service dealer.

 

 

 

 

 

Engine will not

S

Air filter dirty.

S

Clean or replace air filter.

accelerate,

S

Spark plug fouled.

S Clean or replace plug and regap.

lacks power,

S

Chain brake engaged.

S

Disengage chain brake.

or dies under

S

Carburetor requires

S

Contact an authorized service dealer.

a load.

 

adjustment.

 

 

 

 

 

 

 

Engine

S

Too much oil mixed with

S

Empty fuel tank and refill with

smokes

 

gasoline.

 

correct fuel mixture.

excessively.

 

 

 

 

ELECTROLUX HOME PRODUCTS, INC., warrants to the original purchaser that each new Poulan brand gasoline chain saw is free from defects in material and workman- ship and agrees to repair or replace under this warranty any defective gasoline chain saw as follows from the original date of pur- chase.

1YEAR - Parts and Labor, when used for Household purposes.

60DAYS - Parts and Labor, when used for Commercial, Professional, or Income Pro- ducing purposes.

30DAYS - Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by im- proper handling, improper maintenance, or the use of accessories and/or attachments not specifically recommended by ELEC- TROLUX HOME PRODUCTS, INC., for this chain saw. Additionally , this warranty does not cover damage caused by improper han- dling, improper maintenance, or if the saw is altered in any way which in our judgement af- fects its condition or operation. This warranty does not cover tune--up, spark plugs, filters, starter ropes, starter springs, chain sharpen- ing, bars, chains, and other parts which wear

and require replacement with reasonable use during the warranty period. This warran- ty does not cover predelivery set--up, instal- lation of guide bar and chain, and normal ad- justments explained in the instruction manual such as carburetor adjustments and chain tension adjustments. This warranty does not cover transportation costs.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR OTHER DAMAGES WILL BE ALLOWED, AND THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT THOSE EX- PRESSLY STIPULATED HEREIN.

SOME STATES DO NOT ALLOW LIMITA- TIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CON- SEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.

The policy of ELECTROLUX HOME PRO- DUCTS, INC., is to continuously improve its products. Therefore, ELECTROLUX HOME PRODUCTS, INC., reserves the right to change, modify, or discontinue models, de- signs, specifications, and accessories of all products at any time without notice or obliga- tion to any purchaser.

16

Image 16
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackKickback Safety Features Reduce the Chance KickbackMaintain Control Avoid Obstructions Clear The Working AreaChain Brake and CKA Angle Resent and YOU should not ASSume That the Chain Brake will Protect YOU in the Event of a KickInside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & Chain If notChecking the tension Adjusting the tensionChain Tension ON/STOP Switch Know Your Chain SAWThrottle Trigger Throttle LOCK-OUTBAR and Chain Lubrication Fueling EngineImportant Points to Remember Starting a Warm Engine Difficult Starting or starting a flooded engineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Felling Large Trees Notch CUT and Felling the TreeBucking Using a LOG or Support Stand Cutting a Fallen TreeTypes of Cutting Used for Bucking Bucking Without a SupportCleaning the air filter Limbing and Pruning Important PointsLimbing PruningCleaning the Spark ARREST- ING Screen Carburetor AdjustmentsBAR Maintenance Inspect Muffler and Spark Arresting ScreenNeed Service PART? Chain SharpeningIgnition Timing Spark PlugTroubleshooting Table Cause Remedy Your Warranty Rights and OB Ligations The U.S. Environmental
Related manuals
Manual 18 pages 56.93 Kb Manual 18 pages 63.71 Kb Manual 17 pages 33.62 Kb

2150PR, 2150, 2155, 2350, 2375 specifications

The Poulan 1950 and 2055 chainsaws represent a blend of power and precision, designed to cater to both professional loggers and home users alike. These models have made a significant mark in the realm of outdoor power equipment, thanks to their robust features and cutting-edge technologies.

Starting with the Poulan 1950, this chainsaw is equipped with a 50cc engine, delivering plenty of power for a variety of cutting tasks. Its lightweight design allows for maneuverability and ease of use, making it a favorable option for detailed pruning as well as heavier cutting jobs. One of the standout features of the 1950 is its automatic oiling system, which ensures that the chain receives adequate lubrication during operation, extending the life of both the chain and the bar. This model also features a simple pull-start mechanism that enhances user convenience, allowing for quick starts even in cold weather conditions.

Moving on to the Poulan 2055, this chainsaw is slightly more powerful, boasting a 55cc engine that provides increased torque for more demanding tasks. Designed with advanced technologies, the 2055 not only improved performance but also user comfort. It is fitted with a vibration-dampening system, which minimizes vibrations transferred to the user’s hands, reducing fatigue and strain during extended use. Furthermore, the 2055 features an easy-to-access air filter and spark plug, simplifying maintenance and upkeep, which is essential for long-term performance.

In addition to their respective power sources, both models utilize a chain brake system designed to enhance safety. This feature automatically stops the chain rotation if the saw is accidentally dropped or if a kickback situation arises. The ergonomic handles and lightweight construction of both chainsaws make them suitable for a wide range of users, from novices to seasoned professionals.

In summary, the Poulan 1950 and 2055 chainsaws are powerful, efficient, and designed with the user in mind. They combine advanced engineering with practical features, ensuring that whether tackling small garden tasks or larger jobs, these chainsaws deliver consistent performance. With their reliability and ease of use, they have certainly carved out a reputable niche in the world of outdoor power equipment.